Part number - Bulkhead plastic screw/nut
- Thread starter mick 1986
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 11,032
- Location
- North of the Wall
Are you putting a galvanised one on? Only ask cos the galv tends to reduce the size of the holes. Anyway, there are some white ones, very similar to the RTC3745 ones. IIRC I think I used some glass paper to rub the sides of the black ones if they wouldn't fit in any of the small holes.
Are you putting a galvanised one on? Only ask cos the galv tends to reduce the size of the holes. Anyway, there are some white ones, very similar to the RTC3745 ones. IIRC I think I used some glass paper to rub the sides of the black ones if they wouldn't fit in any of the small holes.
Yes it is a galved one. I still need to paint it and sort the small amount of plating on the dumb irons, so not in a rush.
Are they the part numbers you used?
- Posts
- 11,032
- Location
- North of the Wall
Yes, pretty sure they were. I can try and find the other one, that is similar to the small back one, if you want?
If you don’t mind, yes please.
Do you know how many of each are required? I may just buy 20-30 each and be done with it.
- Posts
- 11,032
- Location
- North of the Wall
- Posts
- 11,032
- Location
- North of the Wall
I was going to look on my old rebuild thread cos I put a picture of those three plastic screw locks on it and asked for the part numbers So, I'm thinking they will be there. However, the search feature on the website wasn't working yesterday. Neither is the Your Threads and Your Posts links, so I can't find it just yet. Once it's fixed I'll have a look.
So, I'm thinking they will be there. However, the search feature on the website wasn't working yesterday. Neither is the Your Threads and Your Posts links, so I can't find it just yet. Once it's fixed I'll have a look.
- Posts
- 11,032
- Location
- North of the Wall
@mick 1986
Did you find the part numbers? The search feature is still not working on the site. I can start manually going through the pages of threads until I find my rebuild thread if you want. It's about a year and a half back in time, but I'll be able to find it eventually!
Did you find the part numbers? The search feature is still not working on the site. I can start manually going through the pages of threads until I find my rebuild thread if you want. It's about a year and a half back in time, but I'll be able to find it eventually!
- Posts
- 11,032
- Location
- North of the Wall
Right, I've been trying to find it for an hour but I've failed.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Right, I've been trying to find it for an hour but I've failed.
http://www.allbrit.de/NAV.cfm?PAGE=404600&SPRACHE=EN
May help your search..
Cheers
- Posts
- 11,032
- Location
- North of the Wall
Many thanks, neilly. I'm pretty sure I posted a picture of all three of the different blocks lined up and I asked if anyone knew the part numbers. IIRC. someone replied with them all. Not 100% sure though! Anyway, it would have been fairly easy to track it down if the 'Your Threads' or 'search' functions were working. I think BB is after Accy to fix it. Been a while though. Mick 1986 should be able to find them on your allbrit link.
Similar threads
