P38A Eas setting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

pete12345

Well-Known Member
Full Member
Posts
2,427
Location
Isle Sheppy
can someone please tell me what's the best height setting to have the car on to jack the front o/s to remove the wheel without putting the sensor all to ,,,,,,,,,, cheers
 
Does not matter, loosen nuts jack the axle and remove the wheel. When you refit nip all nuts up before lowering car, lower and torque nuts up diagonally.
 
Cheers warmers I no how to do a wheel it was the eas I was finking about coz didn't want to up the ride height sensor Mabey u could help on another major prob I got tho I've got heat shield and exhaust manifold off but got 1 poxy bolt on down pipe rounded off can't shift it any suggestions be much appreciated fink I've got a cracked manifold tried banging a 14mm on but it won't have it tried heating the bolt but got that spray stuff all over it and it just caught fire so that's a no no
 
Cheers warmers I no how to do a wheel it was the eas I was finking about coz didn't want to up the ride height sensor Mabey u could help on another major prob I got tho I've got heat shield and exhaust manifold off but got 1 poxy bolt on down pipe rounded off can't shift it any suggestions be much appreciated fink I've got a cracked manifold tried banging a 14mm on but it won't have it tried heating the bolt but got that spray stuff all over it and it just caught fire so that's a no no

I used those Irwin Easyouts. Tried those?
 
Back
Top