New Member after advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Phil Sanderson

New Member
Posts
4
Location
Lancashire
Hi all new to this forum few questions.
I owen a 97 discovery which has been of the road for about 3 years dry stored which I took of the road to weld up but never got round to finishing. I'm a panel beater by trade so body is not a issue but mechanical now basics but was wondering what would be the best way or what procedures you guys would do before trying to fire the old girl up?
Cheers for reading
 
Hi all new to this forum few questions.
I owen a 97 discovery which has been of the road for about 3 years dry stored which I took of the road to weld up but never got round to finishing. I'm a panel beater by trade so body is not a issue but mechanical now basics but was wondering what would be the best way or what procedures you guys would do before trying to fire the old girl up?
Cheers for reading
Hi and welcome. After 3 years, do a 'service'. New oil, (and filter) coolant, air filter and obviously a new battery. Drain the fuel as much as possible unless there's not much in there and put in a good few litres of new. Then fire her up and see what happens!
 
Back
Top