Greg's V8 DII Build

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Gregja

Active Member
Posts
114
Location
Yorkshire
So here it is chaps the latest addition to the land rover family.

2001 4.0i ES Monte Carlo Blue.

FB_IMG_1461790297773_zpsjcmyygmi.jpg

New Hella 3000 Spots and private numberplate fitted.
IMAG4422_zpsqc11ptuj.jpg

Tweaking... Terrafirma 2" Lift 3" Extended Shocks + 2" Extended Bump Stops + Extended brake lines
IMG-20160411-WA0024_zpscbjafpft.jpg

Now she's taking shape, 33" BFG Muds on 15x10 modulars still lots to do though, next on list winchmax winch.
IMAG4838_zpsjpalmxkp.jpg

IMAG4841_zpsc3utbrub.jpg

IMAG4834_zpsizyex9o5.jpg
 
Last edited:
Sat Nav, Mp3 DVD system fitted...

IMAG4293_zpsw0b9cmag.jpg

IMAG4294_zpsjpp5zbd9.jpg

IMAG4296_zpssiq522os.jpg


Soldered rca connections onto wiring loom to connect direct to the Harmon Kardon amplifier.

IMAG4300_zps4jowxdxi.jpg

IMAG4298_zpszxq4xurh.jpg

IMAG4301_zps31tzotoc.jpg
 
Looks good. Is it actually going to go off road?

I'm not against lifting vehicles, but it does seem the thing people rush to do -- why?
 
Cheers mate I converted to coils because it would sometimes drop onto the bump stops. And also to allow the 33" tyres to fit under the arches.
As for off roading... I do take it but I'm rubbish at it haha!
 
Taken on sunday...

DSCN0245_zps5br87w7t.jpg


To do list...

Inoperative front sunroof
Inoperative front and rear offside windows
Full service
Repair handbrake
Chassis strip down clean repair and reseal
Extended brake lines
Clean up both axles

Then I can start with the build properly.
 
Last edited:
Stripped down the sunroof mechanism today, it closes OK but very lazy opening, could this be a motor issue? Also fitted the steering damper...

IMG_20160516_100914_zpsqgeshfa8.jpg
 
Just looking at your spare in that pic. What'll you do if you get a puncture? :(

Scrubs up nicely!

Yeah she does with some help from the minger filters on instagram! As for a puncture I do have a spare that's similar to these but not as big. Need to get one really, thanks for the jinx
 
Not been upto much too busy on other projects but have got some new lights and a cb aerial.... but no cb yet lol.

DSCN0571_zps8wwt7uly.jpg


DSCN0568_zps3vccnjke.jpg

Another project,
DSCN0572_zpsaerkyqo1.jpg

And the daily drive, but still a project...
DSCN0574_zpsajun42dv.jpg
 
Hi Greg,

I'm new to the forum, I have just fitted some 33/12.5R15 with a 15x10J ET-32 rim which looks to be the same as yours..? I'm trying to find wheel arches that will suit but I'm finding it quite difficult. Was just wondering what arches you've used, are they D1 arches? Thanks :)

Example piccy attached
 

Attachments

  • 20170119_203441.jpg
    20170119_203441.jpg
    424 KB · Views: 260
Hahaha, thanks for getting back. I bought and fitted mine already. :D

Quick question though, how did you manage to fit the rears so they look right? I found that mine taper down on the back slightly, otherwise you could see the inner arch

Also interesting to see yours sits lower on the front too, I thought my springs had sagged, lol

20170129_134556_zpsowgcxbmf.jpg
 
Back
Top