What have you done to your Landie today.

[PembsLandy]

Got an MOT on my fender !!! and helped fix a SIII starter. And then got pretty cross axled !

 

[LandyRover23]

hopefully fixing crank pully tonight i miss mydisco

 

[The Mad Hat Man]

got it a bit dirty

 

[landowner]

Took back wheel off and inspected brake drum and linings, all new including drum which was a nice surprise, cleaned and soaked spring retaining bolts ready for spring and shocker renewal asap
Soon have a 90 that I can drive

 

[Oldseadog]

Almost finished lining up the Power Steering pump with the crankshaft pulley!

 

[kato Disco]

Removed and cleaned up the tie bars. Fitted some new polibushes and refitted to the 90. Happy now

 

[landowner]

Just found that the spring locating plates on the rear axle of the 90 are rusted through
Was putting my nice new springs on but that'll have to wit now while I get some new plates welded on

 

[bluehaze]

Emptied the rear in preparation for altering the storage drawer this weekend.

 

[The Mad Hat Man]

Just found that the spring locating plates on the rear axle of the 90 are rusted through
Was putting my nice new springs on but that'll have to wit now while I get some new plates welded on

Ain't they bolted on like the Disco?

 

[Dr_evil]

Went and talked to some people about parts may be getting a nice new flywheel for the 3.5

 

[landowner]

Ain't they bolted on like the Disco?

Yes but its the bracket that the dishes are bolted to that have rusted out

 

[Dewin]

Fitted a de-cat & sports exhaust, took her for a spin, seems to be noticeably more eager on acceleration now and sounds a bit better

 

[Billy B]

Cleaned up the exhaust manifold, exiting

 

[charliemopic]

Fitted indicator/side light type clusters to the Disco. Straight swap, no messing.

 

[Dr_evil]

Put on a bid for some side exits

want some of these pipe for me series V8




Pilgrim Sumo Cobra RVR V8 3.5lt - YouTube

 

[craigyb]

Went and talked to some people about parts may be getting a nice new flywheel for the 3.5

have ya still not got it in?? (should i be surprised? )


what ya fecking about at you nancy?

 

[craigyb]

drove it to work and back and was warm for a change. Heated seat on and webasto blasting, was well toasty

 

[Dr_evil]

have ya still not got it in?? (should i be surprised? )


what ya fecking about at you nancy?

Rain stopped play old gearbox is coming out this weekend as is the seat box and I'm gonna hack up the bulkhead too hopefully be able to drop the engine in next weekend by myself or see if I can rope in a helper!

New gearbox only arrived last weekend nice and shiny too just need to get a new clutch for it and possibly flywheel too as someone nearby has a lightened one and a few normals kicking about

 

[craigyb]

Rain stopped play old gearbox is coming out this weekend as is the seat box and I'm gonna hack up the bulkhead too hopefully be able to drop the engine in next weekend by myself or see if I can rope in a helper!

New gearbox only arrived last weekend nice and shiny too just need to get a new clutch for it and possibly flywheel too as someone nearby has a lightened one and a few normals kicking about

rain stopped play.... ya puff

guess your coming in the disco on the bakewell run

 

[Dr_evil]

rain stopped play.... ya puff

guess your coming in the disco on the bakewell run

Erm possibly if thats not broken too was hoping to get this sorted for discodads lakes trip

Other than dumping in the new engine and gearbox my to do list isn't exactly that large haha