What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hammerited the chassis with their aresosol cans to try them out. worked pretty well with 2 cans to do the whole chassis with one decent coat. mostly just interested to see what the cans were like. should get me through the winter with one coat since 3 coats is 5 year guarantee
 
I'll listen out for it:cool:

Couldn't be arsed in the end :p decided I'll do it saturday once I've picked up some new wiring :)


Not sure where I'm going to mount it though as I need the compressor to be watertight, might dismantle it and tiger seal up the lid to body as its the only place water has a chance of getting in at other than the air intake but that needs to be kept clear for obvious reasons :rolleyes: Gonna mount it with that facing down so if water gets in it'll drain straight back out
 
No not yet :p still haven't fitted the breather kit too! Need to get that done before the winter floods arrive. You can get up to 4ft of water on some of the really bad local roads :eek:

Yes you do I will be up in the lakes over winter for a trip if you are up for it?
I've just borrowed some 6mm air pipe from work ;) for my breathers and a 5 way push fit manifold off eBay for £1.59
 
I am having issues with mine :(. She seems a bit under powered, well... rather a lot under powered actually, doing 45 up hills on an A road is not what she usually does haha. I recently changede the fuel filter and just wondering if it could be something to do with that leaking, but it seems to be making a bit of smoke when she is rolling along with the throttle down. Never used to smoke in high revs. One thing I did notice is I can't seem to hear the turbo as well.... does anyone have any ideas?


Ment to be doing a long ol' trip in a couple of weeks and she don't seem to up for it :(

Any help would be much appreciated lol
 
Back
Top