What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Bromsgrove Defender
Well-Known Member
- Posts
- 5,759
- Location
- Out to lunch
Stuballsed
New Member
- Posts
- 1,093
- Location
- Oxfordshire
Shall I have chips or jacket spuds for tea tonight
p.s. Just got distracted by my own avatar pic.
Last edited:
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Took me tools out the boot, finally got space in there again
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Cakes good, spiky poos arent
micromouse
New Member
- Posts
- 29
- Location
- Watford
Re glued the carpet in the back.
Replaced my front sealed beam headlights with halogens,
Fixed the rear fog light wiring,
ate 1/2 a pack of chocolate biscuits in the process.
Wrote a list of things I still need to do
Replaced my front sealed beam headlights with halogens,
Fixed the rear fog light wiring,
ate 1/2 a pack of chocolate biscuits in the process.
Wrote a list of things I still need to do
poblicus
New Member
- Posts
- 10
- Location
- chorley, lancashire
my BFGs are 8 years old, done at least 50k miles are cracked but still got 7mm tread on them. i would recommend. my previous defender had goodyear wrangler MTs and they were better off road. happy tyre hunting
surreyrock
Active Member
- Posts
- 321
- Location
- Brooklands Surrey
My 501 LED (bargain!) sidelight bulbs turned up today, 5 mins to fit
LED on the left, normal bulb on the right
LED on the left, normal bulb on the right
nick2303
Well-Known Member
- Posts
- 4,255
- Location
- Leeds (not by choice)
My 501 LED (bargain!) sidelight bulbs turned up today, 5 mins to fit
LED on the left, normal bulb on the right
oooh... likey... where them from.......
need a link please.....
surreyrock
Active Member
- Posts
- 321
- Location
- Brooklands Surrey
LAND ROVER FREELANDER 2 T10 501 LED SIDE LIGHT BULBS | eBay
There you go mate, i won mine for pennies
surreyrock
Active Member
- Posts
- 321
- Location
- Brooklands Surrey
crashbox
Well-Known Member
- Posts
- 12,347
- Location
- In the UK, thankfully.
Removed the bulkhead outrigger bolt, seized solid so lots of heat, a lump hammer and a pair of mole grips eventually moved it. Then cut off the outrigger, shock horror, rust on a grand scale so have cut out the rust and cleaned it up ready for a new plate then new outrigger. Oh, I also found a mouse nest in the chassis !
Attachments
nick2303
Well-Known Member
- Posts
- 4,255
- Location
- Leeds (not by choice)
fitted new wheel bearing on front n/s... still got a wine thats worse when turnin right then quiet turnin left?
replaced arb link bushes on rear.. old ones had fell out.. fitted spacers under arb mounts which will hopefully stop the arb links turnin upside down...
straightened up the rear bumper which had dropped on the n/s... and managed to slice open my finger on the end of the exhaust!! ouch... end of exhaust was well rusty and very sharp.. so i took angle grinder to it and removed alf inch so i dont do it again..
realised i really need to replace the rear flexi brake pipe above axle.. its gettin stretched due to lift...
replaced arb link bushes on rear.. old ones had fell out.. fitted spacers under arb mounts which will hopefully stop the arb links turnin upside down...
straightened up the rear bumper which had dropped on the n/s... and managed to slice open my finger on the end of the exhaust!! ouch... end of exhaust was well rusty and very sharp.. so i took angle grinder to it and removed alf inch so i dont do it again..
realised i really need to replace the rear flexi brake pipe above axle.. its gettin stretched due to lift...
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
I filled mine up. Again
RED 109 CSW
New Member
- Posts
- 219
- Location
- North Nottinghamshire
Put another 150 miles on it
- Posts
- 83,232
- Location
- Embasinga stocæ
changed the rear bump stops.
or, more precisely, fitted some on there, as there was only the backing plate attached
or, more precisely, fitted some on there, as there was only the backing plate attached
dumbiron
New Member
- Posts
- 154
- Location
- near Buxton. Derbyshire
had the disco running for the first time after replacing the v8 with a 200 tdi
colin132
New Member
- Posts
- 84
- Location
- West Lothian,Scotland
I've just fitted a cubby box in place of the middle seat.What an improvement,somewhere to store my junk.
