EAS keeps auto-selecting off road height...

[Rob Edge]

Anyone had any dealings with these. OBD, OBDII, OBD II, OBD2 CABLES & INTERFACES. Clear Fault Codes or these RANGE ROVER P38A 94-02 EAS AIR SUSPENSION DIAGNOTIC KIT | eBay

 

[wammers]

Anyone had any dealings with these. OBD, OBDII, OBD II, OBD2 CABLES & INTERFACES. Clear Fault Codes or these RANGE ROVER P38A 94-02 EAS AIR SUSPENSION DIAGNOTIC KIT | eBay

You can get it all for less if you look around. Covered in another thread. PM Datatech for EAS cable. ELM 327 you can get for a tenner software is free from EASY OBD11. So is EAS software.

 

[Rob Edge]

You can get it all for less if you look around. Covered in another thread. PM Datatech for EAS cable. ELM 327 you can get for a tenner software is free from EASY OBD11. So is EAS software.

Thanks. Have you a link to the other thread.

 

[Datatek]

Thanks. Have you a link to the other thread.

I have replied to your PM

 

[P38_love/hatething]

By way of an end to this one:
Changed the front left height sensor & cleaned out the exhaust air filter, which i thought had stopped it. Drove down the road and got further than normal before it raised to off road height.
Gave it another clean out (filter) and ordered a new air dryer. Fitted and it hasn't faulted since. Think it might sit slightly high on one corner but hasn't bothered me enough to measure yet - only notice it sometimes

 

[Rob Edge]

I put a new battery on mine 10 days ago and touch wood it hasn't done it since. Th lines didn't have any white powder in but it had a few minor gremlins in the electrickery. It just passed it's mot aswell so happy bunny.

 

[tomcat59alan]

if you change the driver pack does it need to be recalibrated?

 

[Datatek]

if you change the driver pack does it need to be recalibrated?

no