Aux Belt "Squeak" Finally Sorted

[marti 300tdi]

Hi, After much messing around with all sorts of new bearings, new tensioner, THE PENNY TRICK, stripped thread in block, new dayco belt, change of power steering pump pulley & pump, genuine lan rover belt and it was still bloody squeeking.... I tell you this really drives me mad, well I have finally fixed this with a simple fix, use a Gates Aux belt, they are made of a softer rubber and compensate for the landy's poor tolerances within pulley's & tensioner. I hope this is of assistance to the weary few who still have to put up with this, good luck.

 

[The Mad Hat Man]

http://www.landyzone.co.uk/lz/f38/please-read-before-posting-section-75701.html

 

[marti 300tdi]

????? What do you mean?

 

[The Mad Hat Man]

dont post in this section - it will get deleted - or read the above thread or post twice.

 

[marti 300tdi]

If know one posts an answer in here for others to read and to assist others like the title says what is the point of it, sorry but way to strict here for me.

 

[The Mad Hat Man]

so why not just add it to the bottom of the penny trick thread where it would be seen at the same time??

like this??

http://www.landyzone.co.uk/lz/f38/300tdi-squeeling-belt-penny-trick-64595-2.html#post1389848

 

[marti 300tdi]

Theres a guy on here telling about gas and other useful stuff but I am sure he could trawl through this forum and find something similar, I also see other items which can be put on another title; with respect.. get a grip mate.

 

[blue beasty]

.op2:

 

[Bombler]

Yes, me too! (P38) Changed belt, replaced tensioner - what did you say came next?
I've been told that the (reduced) squeal could be due to a bearing in the turbo; what do you think?

Bombler

 

[johnlad]

Yes, me too! (P38) Changed belt, replaced tensioner - what did you say came next?
I've been told that the (reduced) squeal could be due to a bearing in the turbo; what do you think?

Bombler

i think your posting in the wrong section