Search results

Thanks for the reply, it would seem that nobody wants to do the job so I can imagine I will end up doing it myself. I will double check the breathers etc but I am pretty sure it is just the rear seal on the gearbox as it is gearbox oil leaking and not EP 80 from the transfer box.

Hi, As above really, disco 1 v8 with a leaking gearbox, any idea how much is a reasonable quote from a garage to take off the transfer box and replace the seal? I just cannot face lying under the car trying to lift the transfer box on and off. Many thanks Neil

It could be. I had the same on my V8, coolant loss, panic, change cap and all was good. Tried the old cap again and if you went for a drive and got the car hot when you came back stopped and lifted the bonnet you could hear the cap leaking slightly. I was also very happy!

Hi, What you are getting seems about right to me. When I got my Disco it would do about 115 miles to 50 litres of LPG being driven normally. The addition of a roof rack took this to 110 miles. Having spent the last year going through the vehicle checking every single thing including...

As stated you can get twin under slung torpedo tanks, you can also replace the current petrol tank with either a toroidal tank or two torpedo tanks. There are companies that make a small petrol tank that fits along with the replacement LPG tanks. Places link Tinleytech or RPI can help...

How did you lift it? Springs? Springs and Shocks? Springs and shocks and camber correction arms? Body lift? The reason I have not lifted mine is the horror stories of them driving badly after a lift without the camber correction arms. Springs might be ok without arms they might not, you...

Hi, Mine whined when I got it. There were two causes. Try running it without the belt (only quickly) to confirm it is something being driven by the belt. Mine was the alternator and also the idle control valve was whistling, the cause was a leak on the inlet plenum.

Hi, Apart from all the wiring and possibly fuel tank change etc I believe you will have to cut off current engine mounts and weld on the engine mounts from the 300tdi. I think they are different shape/size and in a different position. Neil

Hi, I have to take the plastic bumper cover off of mine to get the bar to fit. It should just come off with plastic clips and then you will need to re-affix the number plate to the metal bumper.

I bought one from these people for my V8 and it has been faultless. LAND ROVER DISCOVERY DEFENDER 300 TDI RADIATOR BTP2275 YEAR 1994 TO 1998 | eBay I have also bought radiators from them for a Mini and a 106 without any issues. :-)

Hi, I have to do the clutch on my V8 Discovery, I have had silly quotes (£550+) from specialists to do the work. I have done clutches and gearboxes on defenders and its easy, crane in through the door with the floor removed, no heavy lifting. The disco clutch changed scared me as the box is...

Hello all, I have been offered through a friend all the parts for a Series 1 Land Rover minus the chassis and ID. Bear with me on this. It was converted to run a 3.9 V8 on carbs and was then crashed resulting in a bent chassis and was written off. It was stripped and all the parts put in...

Can you come and do mine? Cheapest quote I have had is £685 supply and fit :-(

Yeah having done lots of research I believe the book says its a five hour job. People on other forums seem to think labour should be anything between £200 and top end £350 with parts on top. I can see that I am going to end up doing it on the drive .

Waiting for some online quotes was hoping for a recommendation from someone here for someone/garage they know and trust. Thanks

Hi all, Just been quotes £685 to supply and fit a clutch to my v8! I don't fancy doing it myself on the drive and £685 seems a lot. Can anyone recommend a garage in Sussex, Kent or Surrey who might charge less? Thanks Neil

Hi, Having had a 300 tdi and currently got a v8 on LPG in my experience the insurance cost was the same for both. Fuel wise they are pretty much the same to run. The v8 is faster and IMO a nicer drive on the road. Having looked at many i did find that most of he v8's I looked at appeared to...

Check that the waste gate actuator rod has not fallen off the waste gate. It should be held on with a circlip and if it falls off the engine will not develop any boost. You will need a mirror to look generally as its under the turbo, you can I think from memory see the rod from above and check...

Hi all, I have a 98 disco 3.9 and looking for some assistance. Problem 1 is a loud whistling noise coming from the rear of the plenum. I have gone through looking for leaks, cleaned the idle control valve and setup the base idle correctly. Still whistling. Touch the throttle lovely and quiet...

I recently did mine, after searching all the previous threads on here. Set the steering box to centre, there is a hole where you can put a locking pin, I found a punch that fitted. I then adjusted the steering wheel, column to make sure that was also centred, either take the wheel off and...