Search results

I put this in the engine bit as well. The small pipe that sticks out above the top oil connection on the rad 200tdi that has a thin rubber hose to the expansion tank.well I broke it off.how important is it can I just block the hole up or do I need to get the hose connected back on some how

the small pipe that sits above the top oil pipe on the rad (200tdi) how important is it i broke it off today. it has a rubber hose that goes to the expansion tank can i just seal it up or is it done for

well i turn the ignition on and the relay kicks in after a few seconds and then just turns itself off again almost immediately, the second battery is fairly new and i've checked the wiring so am a bit puzzled now. it was working fine upto a couple of weeks ago and it is only a few month old so...

my original one is leaking:( i think its part no:NTC8288 as mine is an old disco 200tdi thats been put in. i have had a bit of a look around for one and seem to only find what look like britpart ones. i try and avoid britpart normally for the important stuff but has anyone used these would you...

i noticed grease had been sprayed on the inside of one of my front wheels. i took the hub off to find the grease in there had lost its viscosity. it was like water. the bearings are fine and all the seals look good, not perished or split. my question is do i need to replace these seals including...

i have decided that it is time to replace my 2.5td 19 j with a 200tdi as it has started using a lot of oil and is a bit of a bugger to wake up on a cold morning. of course i will be keeping an eye on our favorite internet auction site and autotrader but if anyone knows of a decent unit going...

not had any issues for a few months now, well nothing that wasn't my own doing but now my 2.5td oil filler cap keeps vibrating out. it has a breather pipe to the chassis which kind of helps pull it out as it is a very loose fit. i have just cable tied the breather pipe to lifting eye on the...

engine cut out at some lights this afternoon. it would turn over but not fire...i have experimented with different fuels so always carry a spare filter and have fitted a glass sedimenter to the bulk head so i can see any nasties...anyway this was full of gunk so cleaned it out and changed...

hi guys had my 90 a few months now and have been working my way through all the rattles and bangs and found this today its a big metal washer really between the back of the front prop( on the left) and the transfer box (on the right) my pry bar is on the edge of it. i pulled it forward to take...

had my 15 minutes of fame today when i hit the traffic news for closing the slip road...... just burst into flames.....new project me thinks

hi all i havent done a search on this topic 'cos i wouldnt know what to put in but the issue is this.... my 300tdi auto wont start not a flicker so i'm thinking it might be the switch that stops it working if your not in N or P so my question is where do i find this switch/solenoid/whatever...

trying to find the source of a knocking sound in engine bay thats intermitent and found that there is a few mm play in the alternator back and forth on the bearing is this normal? if not does tightening the nut sort it or is it replacement time cheers

doing my timing belt. when i got to taking the old one off all the marks were not lined up together. i cranked by hand but at no point would they line up together if one was lined up the others would be out a few degrees. the engine was running fine before. i left as was regards markings and put...

i was in a shop buying a Volt gauge as the one i had been given was slightly broken when a guy comes up asks if it was my 90 parked outside and if so could i show him which pipe he could fit a turbo vacuum gauge to his 2.5td 110 so i swaggered outside popped his bonnet and could i find the...

got given an old one with no wiring diagram. hooked up the bulb ok so it light s up with lights put an earth on and wired to ignition live but it blew fuses big time have i got the wires wrong way round? would i be able to connect straight to alternator for live? the earth is a screw into the...

heres a long shot...a mates lwb shogun pajero feildmaster was nicked from armley leeds between 8pm on the 31st oct and 3pm on 1 nov N112 NCW siver and blue... think it was stolen to order as he was disconnecting the battery every night so they must have been watching to see him do it

ok then the saga continues after replacing everything to do with fuel including pipes (by-passing sedimenter i have put a glass boat water seperator in the engine bay to replace this) i have made some progress. now it starts with a little bit of effort pulling the fuel through, idles as long...

my 300tdi auto edc starts but cuts out when trying to put any load onto it soooooo....i've replaced or cleaned everything to do with fuel system apart from: the 4th injector sensor. i had the bottom half of it changed and the sensor tested and all was well so i'm starting to think is it the ecu...