Search results

Hi all. I’ve been chasing a low oil pressure problem for a while and have discovered damage on the number 4 camshaft bearing. Having read lots of helpful threads on here I’m fairly certain this is the problem but if anyone can throw any light on it I’d be grateful. Picture attached, it’s a...

Good day to you. I’ve been converting my 110 into a camper and it has not been driven for almost a year. Now it’s pretty much done and I’ve got a problem with no power low down. Once it comes on boost it’s fine but it feels like starting off in 3rd gear. Recent engine work which could have upset...

Unidentified module bolted inside the dash behind the instruments. Doing a cleanse of surplus wiring.

... one of these replacement turbo cartridges from eBay. They seem to be a cheaper than getting a rebuild done - this one is supposedly even hybrid. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F323421098606

Here one to fuddle your minds - don't even know where to start with this one. Spent the morning adding a few lights and 12v sockets to my 110 via an auxiliary fuse box and an isolator. All works lovely, so far so good. Bit later I notice my volt gauge showing just over 8 volts and sure enough...

Afternoon. Been installing a VDO temp gauge in my 110 with a disco 200tdi but the sender is wrong. They sent me the 5/8 unf sender but apparently there is another possibility. Can't measure it myself right now I'm away but does anyone know what the other size is? Engine is 1993 model. Going to...

Evening all. I've been neglecting my defender for a while as I've been off studying but now I'm back and it's time to get some work done on the old girl. First thing i did was pull out the old 2.5td which had blown it's head gasket and install a disco 200tdi. My problem is regarding the...

Continuing on from this thread http://www.landyzone.co.uk/lz/f7/spare-wheel-stowage-163838.html I wanted to stow my spare inside and until now it had just been lying on the floor very much in the way. So i bought the wheel dish in the above post from ebay and here's how I fitted it in...

I WANT THIS!!!!:( LAND ROVER DEFENDER TD5-4 WHEEL DRIVE 6 WHEEL TIPPER-PROFESSIONALLY CONVERTED. | eBay

Just found this pic on ere this dude has done summat very clever with his spare wheel and has inspired me greatly to get out my cutting discs and lay into my wheel box. However before I perform surgery on my poor 110 i wanted to ask has anyone else done this before and would you have any...

After having the gearbox out n re connecting the wires for the diff lock light i found the light just stays on all the time. Wanted to check if the diff was locked or not so put the lever in unlocked, jacked up one corner tried to drive off and the wheel just spun. tried again with the lever in...

This ebay listing says that later 200tdi motors were better than older ones and called 'Gold' engines. Anyone else heard of this? Discovery 200tdi engine | eBay

Hello. Just replaced both front doors on my 110 and having some trouble lining up the doors. I got them fixed up now so they close properly but they wont open all the way. If i try to push it the top hinge starts twisting itself on the bulkhead and it just springs back again. Any thoughts?

Had the tub off to do some chassis work over the summer and had to obviously disconnect the rear lights. Labeled them all up drew some diagrams n that but guess what - now its back together and those damn lights are playing silly games. Been out all afternoon with a volt meter but I can't make...

TIme laps Land Rover Build Part 1 - YouTube

What the bolts are called which hold the bellhousing to the engine. Couple of mine are missing for some reason but I canne find where to get ore.

Hallo Just putting the tube back on after some extensive chassis work. Busy connecting up the rear lights and found relay that is wired in but doesn't seem to be connected to any of the lights. Can't be sure of that though so basically want to know if I should have a relay inside the tub on the...

Bought a new UJ for the rear prop from Paddocks but it seems to be too big for the yoke. I put one cup in with the circlip but the opposite one wont go in anywhere near far enough for the circlip to go there. Any chance i got the wrong UJ? this UJ Propshaft UJ 1989 110 cheers

Evening all Got a couple o things I need some advice on. First up, fuel guage has a new wierd habbit. When its on its way down from over halfway, it will get stuck at about half a tank. I was revelling in my new found MPG down some lanes when it jumped to empty and sent me straight off to fill...

right. the visco fan on my 19j blows air backwards toward the engine. question is should it do this or should it be blowing on the rad?