Search results

The dump valve if clean on its lips only really works when the air is being sucked through as the vacuum closes it, however I had the same problem also would misfire at around 2-3k until water clear. Traced it to two things, one the foam gasket on the air intake bolted to the inner wing but the...

Re EGR removal and the black gunk, my son in law and I did his Defender TD5 90 yr 2000 and my Disco II 2004, both had the same black gunk in the EGR, turbo pipe and inlet manifold. Our theory is that the exhaust outlet is a hot gas coming into the exhaust end of the EGR pipe then as its going...

Hi The hub is an assembly of the hub flange and hub bearing and its these two that are pressed together, the hub should pull off the dive shaft splines, if stiff then a standard puller will work (smear with copper grease when putting back on). With the hub off you can get to the inner...

I did as Patmitch but also took out each sensor, cleaned up and tapped back in with a piece of dowel then did voltage check, the ABS hub splines also have to be clean/all there and run true as this sometimes sends back incorrect info to ABS/ECU which links to the main ECU (worth checking...