Search results

Hi, Hope someone may be able to help. Pulled out the Haldex unit for a clean up and clean the pump filter. On the way I managed to drop the metal pump cover and crack one of the field magnets in the cover. A scrap unit would be fine as long as the magnets are in tact. I will of course pay for...

Hi everyone. Finally made the move from the Disco 2 and bought a Freelander 2, 2010 HSE. I miss the D2 but am enjoying the smoothness of the F2. However..... having put the Nanocom on the F2 I have found a list of faults. I've cleared them several times but they reappear. There are no fault...

Hi Just bought a 2012 sd4 Freelander2. Put my Nanocom with relevant software on the vehicle. Get the message that ‘Not all ECU’s match the VIN number Does anyone understand the issue?

Hi My Disco 2 TD5 has recently started cutting out or getting a really lumpy tick over that clears with revs. Happens just a couple of times a week. I suspected the fuel pump as when the fault occurs I cannot hear the fuel pump running and it’s normally quite noisy (Bearmach pump less than 12...

Hi thanks for the advice. Tried that but there is no way to turn the camshaft without damaging it, no flats or places to grip it. Also the slotted holes in the sprocket mean that the sprocket has to be in the correct position relative to the camshaft or the bolts won’t go in properly in the...

That doesn’t work James. He has set the sprockets out of sync. The timing pins cannot line up. Thankfully he has gone too far with fitting out the head so did png try starting the engine.

Hi, hoping someone could give a definitive answer. My mate has just put the head back on his Disco 2 TD5. But because the marked links on the timing chain had faded he has set it up one tooth out on the cam sprocket. With the head fitted it’s is impossible to move the chain on that one tooth. So...

Hi I'm wanting to clean the injector seats of my TD5 before replacing the washers. Does anyone know of a kit that has the correct size tool. Thanks

Thanks It's very confusing that it might affect mid range power I know.but it is a Land Rover. Guess I'll have to spend more money on a new pump.

Hi all My Bearmach fuel pump fitted less than 2 years ago is now only pushing out 50 psi (3.5) bar instead of the rated 58psi (4 bar). I have for a while had some vibration and what seems like a misfire above 2100 revs but the engine seems to full full power through the higher revs. Not sure if...

The that's no problem ,can soon do that. Drop me a PM Re Re the starter problem check the thin wire at the connection to the starter. Give it a good clean up. It's a known fault and caught myself and others out. An easy fix.

Hi I have the same issue with my 2001 auto td5. I've created a few threads on the issue but no real feedback that pinpoints the problem. There are threads on other forums, one that runs to 39 pages on this same problem, but yet again no real result. I've spent lots of time and money trying to...

Hi No oil in the ecu. Check it regularly. Going take the rocker cover off and check the injector loom continuity. And, for what it's worth gong to check my injectors resistance. Will keep informed.

I had the manifold skimmed when I did the head some time ago. The manifold was well warped and the top stud had blown out of number 1 port. I thought I'd solved the problem at that point. Not to be though, the buggering thing was just the same. Keep the ideas coming though. The answer will be...

Hi Yes had a total of 3 injector looms in the thing. None genuine mind, so I guess worth a try.

Well after thinking I'd cured the vibration/shudder in my 2001 TD5 auto discovery it's back again with vengeance. A local specialist diagnosed a badly worn and noisy transfer box so was trusted to do the job as I don't have the facilities to drop the gearbox or transfer box. Things were a little...

Hi I fitted and engine watchdog to keep a keen eye on the head temp after recently replacing the cylinder head. On a recent trip on a hot day with the caravan on the back the temp on the Watchdog went above 110c. On then return journey things cooled down as the weather was a lot cooler but the...

Hi Yes I'd tried that. My original pump was a little low on pressure so replaced it with a brand new one but no improvement.

Hi Spong Certainly in my case it was one or even two of the cylinders not pulling their weight. I think they were both still firing but leaking into each other. I had done a pressure test on the car using a dummy injector which showed a leak from cylinder one into cylinder 2 but I still cannot...