Search results

Hi Folks I want to change the cover around the gear stick as mine has all split. Any help on how to swap them over much appreciated, thanks

Thanks very much will do

Hi, thanks for that, am i right in assuming the pump timing can be adjusted then please?

Have noticed some engines sound a bit more thrashy and noisy than others, is this any indication as to the state of the engine or is it quite normal?

Hi, i have a few holes in boot floor, but mot not for a while yet, does anyone know if this constitutes an mot failure, assuming everything else ok?

Many thanks all, it is now sorted Steve

Yea, thanks for that, didn't realise the whole thing shouldn't turn, will try stilsons Steve

Hi, any help on the above much appreciated Thanks

Hi, have just been under nearside rear to find shock absorber is waggling about at the bottom, do i need a new one or is there some sort of bush that may need replacing? Thanks Steve

Hi all, got a 96 300 tdi with some of the usual problems, nice to hear and learn about other peoples experiences with these motors, i live in St Asaph North Wales Steve

300 TDI Have found that one of rear shock absorbers can be waggled around by hand at the bottom and makes a noise, do i need a new shocker or is there a replacable bush that maybe warn please

Thanks for the help, but having read through some older posts i removed the 3 way pipe that runs from the thermostat housing to rad and header tank and one was blocked solid managed to clear out a load of brown gunge. Put all back together refilled and bled and now great, no cold water in header...

Thanks, when you say most likely is there anything else that could give same outcome of test? Thanks Steve

Hi all, could someone tell me if i put a pressure tester onto the header tank and pressurise the water system, assuming no external leaks show and the pressure drops, would this confirm head gasket failure. Any help much appreciated many thanks steve

Could anyone tell me if a pressure test on a 300tdi via the header tank would confirm head gasket problems if there are no external leaks to be seen and the pressure drops, any advice much appreciated thanks