Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Y

    Piaa horns

    Hi wimblowdriver. Regarding the piaa horns do I just cut the plug off the purple and black horn wires and connect them directly to the new horn spades.
  2. Y

    Piaa horns

    Hi thanks for the information yes it does have 2 horns I bought 2 of the piaa ones as well. If I cut off the connector do I then connect the purple to live Upper and black to the Lower spades on the new horns is that correct.
  3. Y

    2.4 puma overheating issues

    Hi Rossko72 just seen your post. I have had no issues since the head was replaced on the vehicle touch wood. However when it was removed they could find nothing wrong with it so quite baffling really.
  4. Y

    Piaa horns

    Hello. I purchased PIAA sports horns for my 2010 defender tdci. The wiring instructions mention removing the single wire plug connector from the original horns and then connecting the live to the top spade on the new horn and run an earth wire from the lower connector on the horn to ground...
  5. Y

    overheating

    My 2010 double cab 60k, experienced similar issues with overheating and the temp guage going up then down within 30 seconds, dealer changed everything and eventually got the head checked, test was good no damage to head gasket but landrover told the dealer to replace the head anyway and so far...
  6. Y

    2.4 puma overheating issues

    Hi, After 3 weeks at the dealers I now have my landy back. They changed the water pump and thermostat, this didnt fix it, then the radiator was changed still same problem, Dealer called landrover who told them to remove the cylinder head and check that, With the head removed all gaskets etc were...
  7. Y

    2.4 puma overheating issues

    Hi just wondered if anyone else has had overheating issues with their defender 2.4 pumas. Mine is a 2010 DC pick up and has done 56k, I bought it from a dealer 3 months ago. 3 weeks ago the temp gauge suddenly went up and the vehicle went into limp home mode, the temp gauge dropped back down...
  8. Y

    A-Bar Fitting (Near Disaster)

    I also fitted an A bar from real steel 4x4 last month to a 110 puma, Very well made took around 30 mins to fit.
  9. Y

    defender A bar

    Hello I am looking for an A bar to fit a 2010 defender 110 with air con, just wondered if anyone knew the best one to get and from where. cheers
  10. Y

    hello

    Hi all just thought I would say hello. Just bought a 110 DC XS and loving it.
Back
Top