Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P

    2 starters both clicking and not engaging

    Hi you can try a jump lead direct from the battery to the spade terminal , just don't touch any where else with it , I use a jump lead from the battery then connect it to a smaller wire , so there is no chance of it touching anything else , you could always fit a spade connecter to a spare piece...
  2. P

    Spider/ immobiliser bypass which wires does it join

    Hi I need to know which wires the bypass plug connect to each other , I have cut the plug off from mine... Long story ! and need to know which wires go together , I have used a multimeter to find where in the loom the wires go but not sure which ones to connect together , guessing its fuel and...
  3. P

    Stuck in snow rescue pics

    Quite agree , shame not everyone else thinks like it , guess some people are to busy posting thousands of posts to go out in the first place !
  4. P

    Imobiliser re wire on 96 300tdi

    Ok , long story but whilst trying to remove part of my wiring loom , which had shorted out on the gearbox, at 23.30 in the freezing cold , I was doing well disconnecting all the various connection around the engine ,after spending some time trying to feed the wires through under the passenger...
  5. P

    Another Landie Stolen

    Sorry to hear that any news ?
  6. P

    Still wont start funny electric problem please help

    Fault found , you were right Simon , discovered short on main loom that comes into baulkhead over the top if the gear box , it was actually shorting on the gearbox , wish I'd seen it sooner , before I cleaned up and remade the earthing points ! Only noticed it when I was testing starter by...
  7. P

    Starter motor plays up after wading.

    I have just replaced my starter,( turns out problem was elsewhere in the ) , and was told its the solenoid that gets the water in , it , I put a silicone seal around the joints of solenoid , not sure if it will make a difference but certainly won't hurt. , you can also get replacement solenoid...
  8. P

    Headlining revamp

    Wow what a great job , definitely a job for the summer on mine , hanks for the inspiration !
  9. P

    Still wont start funny electric problem please help

    Hi Yes it is a 300tdi, thanks for the advice shall go an give it a try , with the jump lead
  10. P

    Wont turn over

    Did you cure your problem I have a similar one , and have replaced the starter but it still won't start , would be interested to hear how you solve it. I am in middle of cleaning up earth points
  11. P

    New wiring.. great! (bar one major issue...)

    Good luck , sorry no helpful advice though !
  12. P

    Another fuel leak - t'other end.

    Yes agree with that , leak off pipes went on my 300 tdi , only a small pipe , quite an easy fix , Let me know how you get on
  13. P

    Still wont start funny electric problem please help

    Ok the saga continues , removed all wires from back of ignition switch and made no difference so have ruled out ignition problem . Starter still span when battery connected , until it eventually would spin no more , so suspected Solenoid fault on starter , removed old starter and replaced with...
  14. P

    300tdi cambelt - some final tips please

    Planning this job too myself let me know how you get on
  15. P

    Flat battery and starter problem

    Hi I have had my defender for about 6 months now , I tried to start it today after 4 days of non use and the battery was flat not even any dim dash lights , I connected some jump leads, and as soon as I did I could hear a motor spinning , it turned out to be the starter motor, no keys were in...
  16. P

    Hi

    Hi everyone ,this is my first post , Great site and a brilliant source of info , Paul
  17. P

    Defender 90 Rear crossmember

    Hi roughly what sort of price are we looking at for a rear cross member replacement, dont worry wont hold any one to it !
  18. P

    110 2nd row middle seat belt!

    Hi I have the same problem with the front middle seat belt and had the same response from exmoor trim , and I am not sure how to over come it, I like the use of the roller on mikegsxr landy but I wonder how strong it would be in case of an accident. I, Like you want to keep the rear standard...
Back
Top