Search results

Hi again Mick, got my fog lamps fitted and working, shame about the switch they supplied was it was a different colour to the others that were fitted, i got round it though by utilising the original blank switch cap and modifying it to fit the new switch. All done and looks really good, very...

Hi again Mick. Thanks for that, that explains why i can hear the relay making in the fuse box but can't pin point the relay. I have the fog lamp kit and hope to get it fitted over the weekend, I'll let you know how I get on. Thankls for all your help, much appreciated. Kind Regards Mick T

Hi again Mick. The saga continues, I have just taken off that blanking switch and 'swung' through the red and black wires with a multimeter. They give 12 v when the light switch is made therefore indicating that whatever switch is fitted there must be related to the lighting curcuit (so it...

Thankyou, your'e a star, any ideas where the rear fog light relay is? Regards Mick

Many thanks for the reply, I've seen that diagram and info but i still need info relating to what the wiring that is connected to my blanking switch. If there is wiring there surely it must be there for a reason, The Haynes manual dosent mention it at all or where the rear fog light relay is...

Hi Guys, i need some help. I'm about to fit some front fog lamps (STC7809) to my Freelander 1.8 (2003). I'm a bit baffled as behind the blank switch where the new fog lamp switch will be fitted (above rear fog lamp switch) that there is already a connector plug with four wires fitted. What are...

mick

(figure of speech) Wow, how come i never come across bargains like that. You don't have a spair pair you want to get rid of? I've been hunting on ebay for ages, no joy as usual.

Thanks Guys really appreciated. Great site Kind Regards Mick T

Does any body have the fitting instructions for the Fog lamps STC 7908? I'm at a loose end without them. Regards Mick

I'm also after the STC7908, any one know where i cna get hold of them? Cheers Mick

Not quite, those are gorgeous, looks smart. They would cost more than my Freelander

Many thanks Steve, I will have a look. I have already traced the blanking off connector (nearside lamp) and proved continuity from there to the fuse block (in main fuse panel drivers side). Like you said, i need to get the new switch fitted and prove power is present and that should be ok...

I am also in the process of fitting new front fogs to my Freelander 2003 1.8.(just waiting for my new lamps to be sent) Where should the relay be fitted? or is it already fitted but where, I can hear the rear fog light relay making when i make the switch but for the life of me i don't know where...