just sold my TD5 and got my first Rangie an L322 HSE on a 03 plate :D, so far so good ,its just had new turbo, diff recall and transfer box at 100k as well as discs pads hub bearings ect (receipt for £4329 this feb), but i was wondering what symptoms you get from the gearbox before it chucks...
Hi im looking at upgrading my trusty TD5 soon and i quite fancy a 03 or 53 plate L322 vogue :D, but have heard the auto box is not very reliable ? is this right or just hearsay ? i fancy an auto next as im getting lazy so i was wondering if the same gearbox is in the disco 3 auto? or is it a...
Help needed, fitted a clutch, flywheel and thrust bearing about 6 months ago due to a slipping clutch, and recently the clutch as started to judder occaisionally when pulling away, sometimes when cold and sometimes when hot but not all the time, and i have noticed a slight drip patch under the...
Did the clutch today on the disco :D ,is there really a need for the gearbox to be that heavy :eek: ! ANY WAY did the full monty flywheel etc and also bought a spigot bearing just in case and when the box was out the spigot bearing was deformed out of shape and the flywheel was f##ked, so a bit...
Hi just replaced my clocks due to a speedo failure(needle fell off), i got hold of some 2002 face lift clocks and have put them in and now speedo and tacho work as do the warning lights accept for the raised suspension light (top right ) and i also have the manual and sport lights flashing...
Does anyone know where i can get a "supercharged look" :p grill from for my TD5 as i have fitted the facelift head lights and i think that the range rover sport type grill would really finish off the front of the car
:( Well the clutch has started to slip under boost in top gear now so its time for the box to come out and the new clutch and flywheel to go in.....is there an easy way to do this job on my td5, like slide the box back ?or does it have to come out :eek: . i'll have to do it soon as im off down...
help needed, wife came home from work today and the disco was sitting low on the drivers side,about 2 inches lower than the n/s,so i had a fiddle with the ride sensor on the back thinking it may be stiff or something but seemed fine, after this the ride height had dropped another 2 inches. I...
:mad: just fitted new battery to my td5 and the radio code doesnt match the radio(becker sat nav):eek: now no music or nav or code any ideas,dealers want to send my radio off 2-3 week turn round, dont think so!any one any ideas............ please help:D :D :D
the 3 yellow lights came on on my 2000 disco today :mad: , abs,tc hdc. just checked my rear pads and there nearly on the metal :eek: ?would this cause the lights to come on? got some mintex ones to fit in the morn :) ,but was wandering if it was something serious, tried turning on and off a few...
hi just fitted the later style headlight cluster's to my disco:D ,looks the part and every thing is working except the headlight leveling system,wired as per the instructions but nothing happening:confused: ,do all the new headlight clusters have the levelling system? Checked lights at night and...
hi all ,got chance of a becker sat nav cd head unit :D and was wandering if it would fit in my 2000 td5 es as a direct replacement for my factory head unit(harmon kardon system)and if so what else do i need apart from the head unit for it to work ?
hello all, just got my new discovery td5 es, cool but not as quick as i hoped, :confused: but its going to be chipped next week :D , so hopefully should meet up to my expectations then ,,,,,,,, any one any veiws on chipped disco's?