Search results

Hi all,the cause is not the box, but the lining of the torque converter breaking up and blocking the pump in the box leading to poor hydraulic pressure and then the box eats itself:eek:, as i have just found out myself on my 03 td6, the guy who did my box refits a custom torque converter with a...

hi i had a towbar fitted proffesionally and there is no light facility on the l322 for this ,i was told when i asked the same question after fitting :rolleyes:

Yes that s the one , just scroll thru the menu's on the handset till you find the network section and it should say auto or manual :confused:.choose auto and all should be ok, as the car phones are not network locked from the factory:)

Its the same unit as most of the bmw cd changers, i swapped my whole unit for a bmw one as the land rover one went tits up, straight plug and play but check the plug on the back as there are 2 different types

my mate had his remapped by super chips and it went like sh~t of a stick, but smoked like a train under boost :D

hi i have the same phone ,when i put my o2 sim card in there is no o2 in the menu so did an auto network search and it works but the phone displays BT Cellnet, but never use it as it voice dials or from the tv monitor:)

just sold my TD5 and got my first Rangie an L322 HSE on a 03 plate :D, so far so good ,its just had new turbo, diff recall and transfer box at 100k as well as discs pads hub bearings ect (receipt for £4329 this feb), but i was wondering what symptoms you get from the gearbox before it chucks...

check the large fuses under the bonnet as mine was doing the same after all the cold weather and its a common fault for the compreesor under the car to freeze and blow the fuse due to water in the air pipes as there is no drain for the system, i changed the fuse and hey presto up she went...good...

Hi im looking at upgrading my trusty TD5 soon and i quite fancy a 03 or 53 plate L322 vogue :D, but have heard the auto box is not very reliable ? is this right or just hearsay ? i fancy an auto next as im getting lazy so i was wondering if the same gearbox is in the disco 3 auto? or is it a...

Help needed, fitted a clutch, flywheel and thrust bearing about 6 months ago due to a slipping clutch, and recently the clutch as started to judder occaisionally when pulling away, sometimes when cold and sometimes when hot but not all the time, and i have noticed a slight drip patch under the...

No the fork was as good as new ,unlike the rest of it

Did the clutch today on the disco :D ,is there really a need for the gearbox to be that heavy :eek: ! ANY WAY did the full monty flywheel etc and also bought a spigot bearing just in case and when the box was out the spigot bearing was deformed out of shape and the flywheel was f##ked, so a bit...

has any one ever put the face lift clocks in a 2000 td5? as im having problems with the 2 warning lights for an auto box when mine is a manual

Hi just replaced my clocks due to a speedo failure(needle fell off), i got hold of some 2002 face lift clocks and have put them in and now speedo and tacho work as do the warning lights accept for the raised suspension light (top right ) and i also have the manual and sport lights flashing...

Does anyone know where i can get a "supercharged look" :p grill from for my TD5 as i have fitted the facelift head lights and i think that the range rover sport type grill would really finish off the front of the car

Hi, usually the little dome shaped sensor on the windscreen is a sun sensor usually fitted to the car if it has climate control to help the car monitor the inside temperature , so if the car has climate control then this is what its for if its no climate then it would just normally have a...

take it thats the input shaft seal and the ? ? ? ? ? ? ? ? ? seal :confused:

Is that the front and rear prop seals?

just gettin a bit of judder ,so going to do it all then i can forget about it when its done, dont fancy takin the box out twice

:( Well the clutch has started to slip under boost in top gear now so its time for the box to come out and the new clutch and flywheel to go in.....is there an easy way to do this job on my td5, like slide the box back ?or does it have to come out :eek: . i'll have to do it soon as im off down...