Search results

I tried putting the correct m10 helicoil in but access is an issue without taking the engine out. For now I have a m6 securing one of the 3points. When I take the engine out at some point i will fix properly. I have also just changed the solenoid to a completely brand new unit so cannot believe...

I changed my slave last week on my 200tdi. With the hose removed and the bolts out I slowly edged it out until i could grab it and hold it in position. Once the slave was out i cleaned it all up and left the rod hanging about 1cm out of the hole ishh. Worked for me

I have since put the starter motor in having cleaned all connections and charging the battery. However, when turning the key there is absolutly nothing. The normal lights appear on the dash and there is a click, but no turning of the starter at all. I tested the starter by running a wire...

Seems like the most logical option mick, is helicoil the best option? haven't re threaded before. Instead of being instant it has begun to take longer to start with an added grinding noise each time. I hold down the ignition for maybe 2-3 seconds (which after most startup is taking longer each...

Ive gone and looked at my earth points: 1. - Battery to side of gearbox 2. Transfer to side of gearbox?? 3. Starter motor earth to engine 4. Engine to chassis Seems about right? Will give them all a good clean once the rain stops!

Havent made that clear! There is: 1. Battery to chassis 2. Starter motor to engine If there is chassis to engine which i assume there is where would it be?

Hello all, I have a defender 200tdi and have had issues with starting over the past 3 years or so. I last replaced the starter motor for a bearmach December 2014, previously a wood autos brand and before that bosch. From what i remember from the last fault it steadily took longer and longer...

Back again.. Im assuming foxhams open tommorow if im correct. I tried the number to comfirm but didnt get through. Does anyone know? Me and a mate are thinking of heading over from Bristol.

alright thanks for the insight, ill try and give it a go

just off gloucester road

Great, i might try that out then.

Hi all, Im a student in Bristol and have bought my landy across from home and looking to do a bit of pay and play. I've heard dundry is very close, but not sure when it is and whether its open at the moment? or if there are any other decent sites around (foxham seems to be the closest?)...

UPDATE: Still have the same issue as before which was a clicking solenoid so I believe the rebuild worked. However, it is missing the metal pins, as I found no way of attaching the motor to the casing with them on. Im going to email superwinch, but if anyone had any possible fixes that would...

Cheers for the help guys. I've tried the parts diagram search and there's a few which give me a better idea. IamRobbie - Yes I'm pretty sure it does just need to work out exactly how they fit.

If you can afford the insurance go for it! But it's down to personal preference and what your using it for as well.

Hi all, Couldn't find much on the web about putting a winch back together after a clean so im here now. Basically i've forgotten how the motor side of my winch goes back together. Ive got the motor in the casing but confused about 3 metal pins which from what i remember fell out of the...

@discomikey did u work out how to do it in the end? :)

Update: New wiper cable( too long), new gears, new motor and park switch. All fitted and works, but not on intermittent or screen wash, o and the wipers don't park??? Any ideas, nearly everything is new? Checked wires to motor and all read as they should. Any help appreciated Cheers

All parts are ready to go in now for the weekend. Was wondering if it was worth greasing the wheel boxes even though they were put in under a week ago by my garage? One was moving with no problems, the other one was a tad less free? Cheers

Cheers for the quick responses. So far I have removed the cable and waiting for the new parts. I will let you know how it turns out. Thanks again.