Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Yes, was working, it was necessary longer to hold the button! ..... until fluid flows through the valve, and the cistern remained empty. :(
  2. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    A few pictures it might be useful to someone. Disassembly sucks, the membrane of the new valve is very hard and does not work!
  3. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    The next mission: - removing the windshield washer reservoir. - Leakage from check valve, highway for rear window.
  4. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    And a dissection of the sensor. :) :mad:
  5. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Mission accomplished, replacement of - ABS Sensor Front - STC1749. STC1749 - Sensor - Wheel Speed - Front Wheels - ABS Discovery 1, Defender. Attention: - if you don't have oil seal ABS - (25) -remove only the sensor, do not take out sensor bush ABS - (26) you'll break the gasket !!!
  6. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Yes, that's how it's taken out, I hope it turns out like this. Not an air gap, the cable is broken. .... I will buy a new one.
  7. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Guys I need help. How to remove the front sensor of ABS Discovery 1- 300Tdi ? Is it just a pull out or develop both bolts on top swivel pin. .... if there is a topic with pictures how it's done I will be grateful!
  8. PETER PETRAKIEV

    Discovery 300tdi Brake upgrade

    Look here too, there is a picture: https://www.landyzone.co.uk/land-rover/my-project-land-rover-discovery-300tdi.171282/page-14#post-2873086
  9. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Writes only, 3 Ton Heavy Duty Steel Ultra Low Profile Floor Jack Quick Pump Lifting Car - lifting range - 75-500.:( ....I threw the box away.
  10. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Does anyone know who produces them the wheels? They are bought from Devon 4x4.
  11. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Yes, bad luck, and coincidence crossing of welds! :( :eek: .....in which part of Bulgaria you are? Thanks.:) Will look and I will write what brand it is Mike.
  12. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Welded, cleaned and powder coated. .... how much will endure. :(
  13. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    ****ing day, ..... bad luck or it should have happened. .... cracked weld! :mad:
  14. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Thank you Towsey, ..... just a lot of love and desire/patience! ;)
  15. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Until now drove with BP Energear Hypo 80W-140 after BP Energear Hypo 80W-90. ... but, they're gone in Bulgaria! That's what they drive quite a few racers friends. I have already passed 1200km of tests, the oil is not thick. Yacco BVX LS 1000 75W140 is a 100% synthetic long-lasting lube...
  16. PETER PETRAKIEV

    My "project" Land Rover Discovery 300Tdi

    Oil change in differentials, and on the way.
Back
Top