Search results

Hi ref tow electric bracket your right only comes as a complete unit when mine rusted out i just adapted a single bracket by taking the rusted one off the disco and copying shape onto cardboard and cutting out i also changed the bolts out as well rusty and very tight

Hi i would use new stud's and nut's on exhaust and intake manifolds as you've already going to do the head gasket and clean up it would make sense also if they have to be removed in the future makes your life easier no striped or broken stud's

Hi the harmonic valve / balancer is to reduce noise of the ace system as it can be quite noisy without like a drumming sound when pressurised i ripped mine out when one of the front pipe's went i then brought modified block and hydraulic hose's front to rear as landrover should had done no...

Hi i'm thinking this is the pipe with the harmonic valve in it you will need this .The way i did mine was to join it just below rubber part if this has'nt burst it reconnect's inside the wheel arch any hydraulic hose company should be able to make up union's for it .

HI best blades i've found are the bosch 307 i think it's something to do with shape of the screen that make's after market one's don't touch also a lot of people change them for disco 1 arm's and blades prob better fit

hi unfortunatly the garage is correct in some way to replace the whole ace system prob looking at 2k . yes there is a relay you can pull out that locks the rams i beleive , someone be along to say which one . Other option's would be to buy a non ace part's ie- Pully /belt and front and rear anti...

hi Andy never seen 807-A or-2 dont buy from halfords look for a local motorfactors near you or europarts ive just changed mine if remember correctly i think it a sliding lock onto arm

hi bosch 807 is correct fit because of the shape of the screen other blades tend not to fit flush on screen

Hi Andy I also have to replace my n/s/f door regulator which I brought from jgs4x4 I also got clips as well part number MWC9134X20 trim stud x20 £2.59 hope this helps

Thanks fery I'm back home at the weekend so will look more indepth into issue also will plug in my hawkeye see if anything pops up cheers

Hi yes towing tyres are standard 255/55r18 not remapped was thinking either turbo pipes but got no black smoke or turbo modulator an pipe work need to de-egr as well

Hi fery thanks for reply new maf last year though not genuine was sieman / Lucas I remember high pressure fuel pipe to tank chaff through last year and replaced and serviced with new fuel filter not checked red plug or map yet as currently away with disco and caravan was when noticed issue as it...

hi can anyone please shed some light my discovery td5 facelift feels though its sluggish and down on power and on hills especially when towing pedal to the floor sometimes I know these aren't formula one but feels like something's missing serviced every year currently on 119k thanks

You can use disco 2 hinges on disco 1 back door no problem done this when my lower hinge pin snapped just do one at a time it's a heavy door then just adjust to fit

Yes mine is a td5 and still has ace system

Hi +1 what sierrafery says I brought one of those last year great battery great price as the batteries listed 069 etc are for the disco 1 it's just the listing haven't been up dated fir disco 2 which needs a much larger cranking capacity the only thing I had to do get it fit was to cut the...

Hi think it's axle breather pipe

Warwickshire

Thanks for your reply looks like a strip down then my only problem is at current we are not allowed out as I don't own a garage or have a drive only the street but hopefully sort it out soon thanks again

Hi I also headlamp washer problem on my facelift disco can you confirm which hose you used and what length thanks mine works but when I put it nose down into curb o/s/f leaks so thinking hose is split thanks