Search results

Looks very nice I've always had a soft spot for p38's. have the headlights been replaced as they look like the pre 2000 facelift ones? I can't believe they didn't put fog lights on this model either.

Hi. Is it when pulling away or does it happen when it's up to speed?

Ultimate Landrover are very good there based in Netherton, ive used them several times for my range's and Freebie

Have you checked the relay in the boot area drivers side?

I thought all Bordeaux's where red and released in 2001 at least my last one was. May be Wrong though.

Hi it's the transfer box just behind the gearbox it appears to be a fairly common problem. As soon as I hit 4000rpm in mine i got a nasty grinding/vibration noise if I went on to 5000rpm it went. The way to check its that is when stationery pop it in neutral and try it then if the sound is still...

It sounds as if that's the ird mount bracket mine did the same at exactly 4000rpm. Check this first the parts only about £20.00. Dave

Just an update for everyone I've just had the car back from the garage after having a new clutch kit fitted. The mechanic lubed all the right bits and sorted the gear linkage out which he said was pretty stiff. He also noticed my rear diff was leaking so he popped a new seal on it too. It...

I think I will go for the heavy Duty clutch kit. Will get it booked into the garage this morning and let you know the findings. Thanks Dave

Thanks for that would reccomend the heavy duty clutch? Also would durability be better than the standard one? Thanks

Perfect. I will print this off and pass it to the garage hopefully this will cure the problem. How much of a job is it to change the clutch in a 1.8 freelander? Thanks again Dave

Hi. I'm having a bit of a problem with my freelander it's a 1.8 se 2004. I've owned it for around 2 months now and have done quite a bit of work on her inc vcu and a full service. I'm having an issue pulling away in 1st and reverse gear. It judders in either gear from a standstill it's as if...

The only reason I changed was due to having a freelander before and knowing what can go wrong if your VCU starts to seize. I thought for £300 fitted with new bearings was pretty good value. Mine was starting to go tight in reverse on full lock but I suppose many wouldnt notice it. As I'm...

Just had my VCU replaced by bell I'm going to post a thread about it. As the service was top notch and they know there stuff about freelanders. Mine had done 74k and had matched tyres all it's life replaced In Sets of four. It wasnt completley gone but was well on the way. Hopefully I caught it...

Hi. From my experience with my old TD4 which had a rover Ron MAF you will need a MAF box from him to convert it or use a synergy 2 which was the option I went for as you will gain a nice increase in power and be able to use his MAF's. Don't be tempted to buy a cheap oem MAF though I tried this...

Oh dear just checked my clutch level opened the cap and some spilled out. I quickly put the cap back on not too much came out and the clutch still feels ok. I guess there is enough fluid in there.

Ok thanks. One thing I havnt checked that I will this morning is the level of the clutch fluid. Only just thought about it. Thankyou for all the input So far

Hi it's a 1.8 are you still able to bleed these? Or is it just the TD4 Thanks

This was the information I had too. Always put new tyres on the rear. And move old ones too the front

I've been reading up. I think I will get my local garage to do it. Just to save any problems. Thanks for the input hopefully I'm nearing the end of the faults list with this freelander. I've only just got rid of my range rover due to never ending faults. Maybe one day I will learn not to buy...