Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    td5 oil leak on right hand side

    Hello, Had the same on my Discovery, I cleaned the area started the car and went under there with a tourch and found it was where the filter block bolts on the engine it has 3 bolts. Fitted a new gasket with flange sealant no more leaks. ian
  2. J

    Fuel pressure regulator valve repair

    Hello, Had the same problem, the troube is that the aluminium casting check it with a dail gauge, wears not just the o-rings, can fix it with a S/S sleeve, or use high temp flange seal on face of the steel face works a treat. pumped it to 100psi no leaks. Saves $480 here in OZ. Ian
  3. J

    MIG Welding with ECU

    Hello, I have a TD5 and done quite a bit of welding on mine with everything connnected what you MUST do is have the earth right next and on the bit that you are welding then no trouble, if you earth the chassis and weld on the exhaust well then you will have problems. Ian
  4. J

    What mileage is your Disco 2 on?

    Hello from Australia, I have 180,000k's around 110,000 miles it is a 2004 Classic TD5 goes really well, just installed VNT and lots of other goodies would not have anything different. We do lots of miles down here in WA. Ian
  5. J

    Hello to Everybody

    A big Hello to evrybody on the forum. I live in Australia, in Perth I have owned Land Rover for the the past 9 years. First was a 300tdi which went very well and did when sold over 500,000kms on the clock. I now own a TD5 Classic 2004 which is quite well tuned, in the proccess of fitting...
Back
Top