Search results

I have purchased another 90 and sorted most of the wiring issue out except the interior/door courtesy light wiring. The previous owner bodged about quite a lot with it and I am unsure of the routing and what connects where. I have the purple and blue wire running across the lower dash just cut...

I have a 200tdi defender in need of the lower dash section as it’s been chopped. Any available in the midlands area? Tia

complete 300tdi discovery breaking for spares. Engine has a knock but starts on the button Good injectors pump turbo intercooler panels etc Based in Halesowen West Midlands

I'm sure this is covered accurately somewhere but there is soooo much conflicting waffle on the net around this i thought it best to ask. I have a Defender 200tdi with the gauge PRC7311 in it. The temp is reading at the top of the white are just before it goes into the red. However, the engine...

My 300 has developed a cammy sounding knock/tap. It ticks over fine but starts to knock at around 2-2500rpm Performance is unaffected at present but something is going to give if i don't locate the problem. It does it whether warm or cold but seems marginally worse as it warms up. I'm lead to...

Hi Guys Looking for help on my binding brakes issue on my series 3. I believe i have changed just about everything likely to cause binding and they're still intermittently binding on. Its a single circuit with servo system 10" all round. Changed: Master cylinder Servo All cylinders on each...

Looking for a 90, anything pre td5. Any condition good or bad considered. Just PM with what you have. Willing to travel for the right or interesting vehicle.

Looked around for info on this to no avail. Can i remove the rear (Num5) main bearing cap with the engine in situ without removing or pushing the gearbox back? I have swapped mains and big ends on the entire engine except this cap and it looks like it may not come off without much faffing...

Anybody have a spare 300tdi discovery turbo charger knocking around for sale. Thinking of getting a core should one not be available locally (ish) thanks

I have a 300tdi in bits that someone has filled with rad weld in the past. My query is, the three triangular holes between 1-2 2-3 3-4 pistons. Where do they go in the head? should they be holes or blocked up as its just full of rad weld at present. Looked at loads of images but some have...

I bought this car with the best of intentions but there is too much work required for me to take on Its a 3 door on a J reg. Green with beige interior. Misfire in number 1. In generally good body condition for an early disco For more details phone me on 07966087411

I bought a 200tdi discovery with the best of intentions but it needs a bit too much work for me so i'm breaking it. Its a 2 door model in green with beige interior. Engine was a runner with a mis on number 1. Body not bad for an early disco. Chassis seems good too. In the short distance i...

I have a series 3 which i have just got on the road after many years laid up. My issue is the brakes are not the best to say the least. They work but i have to press them really hard like the servo isn't working. i'm also finding after a few miles, they start to bind. Is this a sticking...

Have various parts available that i wont use for my resto Got various glass and several screens and surrounds 1 bonnet Series 2 clocks various switches and ignition key and barrel Various wheels and tyres, weller, series and complete set of discovery 1 Brand new shock absorbers x2 several series...

Help needed on tracing the lack of power to the above items. I've followed the wiring diagram for a series 3 with reference to the power supply and have traced it back to the regulator at the back of the clocks which is a solid dark green wire. There is no powere there hence none to the gauges...

Not sure if this is the right section but got to post somewhere :) Had a defender, gaylander and now onto a series 3. Got all the bits i want except the safari roof. Got the sides, only need the top roof skin, although would take complete hardtop. Anybody out there have one or know of one for...

Got a Freelander 1 2003 TD4. The pipe from the turbo is splitting so needs replacing. Whats the general consensus on standard replacement vs silicone aftermarket. Secondly, any recommendations on where to purchase.

Got an 03 td4 and getting only about 29-30mpg knocking around. Wondered whether this was the norm. What are you guys getting out of yours?????

Hi My wiring just at the plug to the fuel rail sensor sheared the other day. I have soldered it but could do with this section of wiring if anyone is or knows of anyone breaking a TD4 freelander. Cheers

[SOLVED]I have replaced the gummed up egr with a blanking mod, ie straight through pipe.with blanking attachments. However, upon startup the management light came on. Any ideas as I haven't touched any electronic components and bolted up everything ad it came off.