Search results

Cheers, fully agree and will do eventually, my intention is to remove and do the whole engine but for now I'm looking for a quick fix if possible just to tide things over until I've time to do the whole job. Thought I'd try using a new uprated relief spring first then if that doesn't improve...

Cheers, I'll do an oil change first and see what difference that makes, might also check the pressure relief valve and spring as well. With that in mind, can that be checked/changed without having to remove the pump and save having to re prime the pump or do you think I might just as well do...

That might be the cause or some of it. I'm using Morris Lubricants Golden Film SAE 15w-50 Classic Motor Oil. Think changing to the 20w-50 version might help?

Hi All, So, I am the proud owner of an old Landrover 110 SW V8 1986 which has been dry stored for circa 15 years. In a mad moment of brain relapse I decided to restore the old girl. So far all has been going well and now near completion. Sadly the engine is suffering low oil pressure when hot...

Clutch, may be! seems ok but might be worth it if I'm taking everything else to bits. Carb's need some recon is there plenty of kit available, reckon air is leaking in as idle running is irratic. Mike

Hi, Thanks for that. By box, do you refer to gearbox, transfer box or both? The 'A' frame is comming off anyway as I'm fitting a new Self levelling unit, if I can get the damn bushes/pins out! or one of 'em at least!

Hi All, I have this 1987 LR 110 V8 (3.5ltr) Petrol, quietly sitting in my shed, which after many years I am about to start to restore!!!!! Two jobs need attention to start with but am not sure what are the faults so which way to go is the question. Repair or replace the affending parts etc. The...