Search results

sorry for writting post in capitals

HI FOLKS I HAVE A 1.8K SERIES FREELANDER SERENGETI 52 PLATE THE PROBLEM I HAVE IS MY EXHAUST IS BLOWING FROM WHAT SOUNDS LIKE THE MANIFOLD AREA HAS SOON HAS THE NOISE APPEARED I WENT AND BROUGHT NEW MANIFOLD GASKET AND FLANGE GASKET TOOK MANIFOLD OFF CHECKED IT OVER FOR CRACKS COULD`NT FIND...

thanyou all for advice given I will go and check everything out and get back too you all thnx

hi folks got a 52 plate freelander Serengeti I brought this car in august fitted a new head gasket and new valves etc finaly got it on the road 2 weeks ago engine running smooth everything seemed fine then wifey was driving to work when she started to have trouble getting gears. she managed to...

hi folks can any one help please i seem to have an oil leak but can not find were it is coming from has the oil is above the propshaft at the front some oil is on the gear linkage and goes all acroos the body above the prop but there is no oil on the prop it self or around the ird unit i`m...

thnx nodge68 it was the pump m8 got a new one put it on and she started straight away thnx for advice

no m8 there is nothing coming from the pump so could it be the pump thats my problem after i spent £69 on a friggin camshaft sensor...

thnx freelaner i think you may be right in saying fuel pump has when you try and start it you can tell it`s getting no fuel car`nt beleave i wasted £69 on a camshaft sensor if it`s the friggin fuel pump thnx m8 i will check it tomorrow

tried fuel cut of switch not that m8 thnx

hi folks hope some one can help me the other day my wife was driving along in our freelander when it just decided to cut out and now refuses to start had it towed back to my house by rac...i have replaced the camshaft senor which my diagnostic machine gave me has a fault but freelander just...

thnx guys will check tomorrow

hi folks hope you can help me just recently i have noticed a cracking crunching noise when reversing.. also i am getting very high fuel consumption i`m putting £25 quid in every 2 1/2 to 3 days.... HELP PLEASE:confused:

hi there is it like a thumping noise when your turning a corner slow. if so it`s your propshaft bearings. i have just changed mine now alls fine did mine on my own but it would be better with two people has tricky to hold propshaft up whilst removing bearings from under car..

defo alternator get it changed has for the shaking just get your wheels balanced...

hi there just replaced my clutch and master and slave cylinder all for £104 brought parts and did it myself took me 5hrs thats gearbox out clutch in box back on then master and slave cylinder of then on ... advice power bleed the clutch has this forces fluid through and you get no air lock...

yeah so i thought but rims are very close to caliper about 2mm gap between them not going to risk leaving them on ...

thnx m8 yeah lesson learned by me alloys was of a X reg so i guess ur right m8 i bang em on ebay thnx for your advice

brought them from scrap yard came of a X reg freelander the wheels are realy close to the caliper only about 2mm gap also the wheels on the back fit flush to the drum so i guess lesson learned..i will just keep looking for some alloys that will fit thnx m8

hi folks can some one please help me brought a y reg 2001 freelander that had steel wheels on so went and brought me a set of 5 alloys for £100, but has i put one on the front i noticed it was realy close to the caliper is there a difference in freelander alloys because i thought they would all...

did you have the head skimmed before you fitted new gasket