Search results

i checked end float and the aluminium was a max, but it was the backlash that was problem teeth on aluminium looked bad. checked housing and it has no wear. i have fitted then into housing and there is no backlash and end float is good. just wanted to know if there is a problem with two...

Thats a tough one, but if it looks and sounds original than thats probably enough. If you have the skill and time to beat your panels back to shape then that for me is better, a lot of my panels have big holes and the aluminium is split in a lot of places. and someone has cut bigger holes for...

Hi Guys I've bought new oil pump gears for my series 3 and both the new ones are steel is this correct as one of the old ones was aluminium? Thanks

Question I've got new gears for my oil pump, and both of them are steel. One of the old ones is aluminium is this correct? Thanks

The wife has just told me "It's nothing to do with me but i like limestone not sand" so make of that what you will.

thanks guys, i will keep it LHD but i was just curious to know whats involved cheers

Has anybody converted one from left hand drive to right hand drive?

on the subject of repainting is a sand colour in keeping with year? does anybody else have a sand coloured land rover with a white roof?

What does everybody call there landy? I don't mean Bas***d or s**t heap. Been busy with starter and fuel pump, starter painted will post pics when reassembled tomorrow. Thanks

Thanks for the picture that bonnet is exacly the same as the one fitted to mine. Nice bikini top

Hi Guys, first thanks for the comments, landroverebuild was me trying to be clever as in Ebuild:doh:. The ultrasonic tank i bought is the one above 6.5 litres, it does a fantastic job, i cleaned 3 carbs for my neighbour Ian for his mini (twin SU) and his sons for his bike they came out very...

It's not cheating, it's easy i don't have time to go writing code i've got to work and do my 109. doing it the hard way cuts into my rebuild time.:)

no its easy i used moonfruit and made the first few pages in minutes

Right, i think thats it site made to 1024

Hi Guys, The website is easy i just use moonfruit, its free if you don't want to have anything too big. I will shrink the size down to 1024. My internet and phone have only just come back on from friday afternoon. Thanks guys

I think i will keep it left hand drive unless the conversion is easy, has anyone converted one? New ultrasonic tank came this morning trying it out now.

Yes my computer is wide screen, i will try to shrink it down a bit

Hi Guys, As i just started attempting to rebuild my 109 i have been taking pictures of what i have done so far and after following with great interest some of the really good threads on here especially 90truckcabs, i decided to set up a web site to show what i have done and what i have...

Hi Guys I am rebuilding an engine and am having trouble with the main and big end bearings, i have the numbers printed on them but can find no reference to there size on the internet or in the parts catalogue Can anybody help me Mains are "ROVER 516815" on one end with "4747" on the oposite...

Thanks guys. The engine is being stripped down and rebored and having hardened valve seats, crank regrind. hopefully i will find any more bits the last owner left in there. The new pistons valves seal and full gaskit set along with new valve guides have arrived this morning. just have...