Search results

Hi all, I have just acquired a '96 300 tdi manual i think the injector pump is duff, any thoughts much appreciated: Going to start it in a morning it fires instantly and runs as sweet as a nut, if you give it full throttle nothing happens!, after ticking over for 3 or 4 mins it will rev but...

AGGGGGHHHHHHH, just gone to it, it must of heard me, as now I have the red lamp flashing on the dash and the "B" crossed and flashing on the odometer now it wont crank nor is the fuel pump running any suggestions...except get a box of matches!!!!!

Thanks for that, have booked her in to my local stealer SWMBO wants to go to a horse show at the weekend more than my sanity is worth for her not to go!!!! Thanks again P

Hi, all fuses in good order, FL9 is missing though? there is no crossed B in the odometer, however..... central locking relay is really hot and I seem to have 20.6v every where I look back door seems superlocked as even though I have climbed through to open it it still wont from inside or...

Hi thanks for the reply, checked both fuse box and BCU cables seem ok no corrosion or water ingress, your help is much appreciated, Phil

Hi Guys, long time no see!! believe it or not I have had almost a full year of problem free motoring from the rangy and the disco....however..... got a very strange problem with SWMBO Td5 went to it yesterday pressed the blipper and it unlocked, I drove down the road and realised I had no...

Hi all, finally got round to looking at the range rover again, just wondered if anyone knew the size of the blocks needed between the bump stops and axles, bought a snap on verdict and it asks for large and small bocks guess the small are 2x2 but no idea what the bigger ones are...can anyone...

Hi In tank pump will be the problem it was on mine, having said that for the sake of £3 you may as well do the leak offs first

Hi thanks for the pic wammers will go and check in the morning.... if she goes into hi mode she goes up but still unlevel other thing is the up light continues to flash till you open the door or shut her down, mate of mine has a solus pro he said put some 2x2 blocks between the bump stops and...

would think its the in tank pump it was on mine, having said that bit of leak from the engine bay would suggest leak off pipes cheap enough though, so do both, regards the alarm issue would seem to indicate the battery isn't up to much..hope that helps

Hi, checked the valve block dryer resevoir all the lines and replaced all four bags was wondering if previous owner may have connected the pipes to the valve block wrong any ideas where the pipes are supposed to go?? other than that thought maybe ride height sensors but theres no codes!!

Hi all, bless her she's collapsed on one side Fire her up and all four corners lift but not level drivers side is low front and rear looks like drivers side is normal and passenger side is in wading mode, if you let her down to access mode she goes down but again unlevel, turn the key off...

Hi its a 2001 DHSE,

Hi all, got a weird one here, p38 2.5DHSE, driving to the local shop saw smoke coming from the front offside wheel, pulled over the wheel was red hot, left it for a few minutes when i went to pull away she was going no where in drive foot down nothing!!! finally got it home swopped the calipers...

Hi guys..problem fixed!!!!! refurbed the comp and fitted a new thermal now runs nicely lifts as it should but unlevel but will fire up the modis and reset the heights over the weekend...thanks again for all your help

Hi guys checked it out and there is no continuity between orange and black, if i short the orange to earth the relay cuts in and the pump runs, so it looks like the thermal switch has died....problem is that i left the pump running for about 3 or 4 minutes but she didn't lift just sat there so...

thanks guys much appreciated, will give it a go at the weekend and post the results

Hi all, got a really odd problem with my p38 1998 2.5dse the suspension pump will not run unless i connect a 12v feed to the purple/light green cable feeding it, the timer delay relay appears to be working and there is voltage going to the ecu, but there is NO trigger voltage though to R20 in...

got a 5.7 v8, only does 10 to the gallon , so i thought id have a derv one as a cheaper runabout, looking like this one is gonna cost at least a torque converter or at worst a box as well

Thanks for that guys, mirror thing sorted thanks gearbox is changing gear just very late, 2nd to 3rd almost 3500rpm the takes an age to go into top have to keep taking my foot off the throttle to make it change...weird, have ordered a IAT any one know where its located?? thanks