Search results

Thought I might put some fuel in mine, again!

Check the power supply/earth leads are tight on the Becm unit under the drivers seat. I had numerous problems with mine when I bought it including the fault you describe, turned out to be a loose connection!!!

Where is this RF receiver located? My DSE also drains the battery very slowly.

Cheers. I'll get one ordered when I have a spare couple of pennys.

Can you post a link to what I need to buy so I can cure mine? Thanks.

Thanks for that info. I removed the RH tail light cover and found an aerial connection that was rusted so unplugged it and gave it a bit of a clean, hey presto, good radio reception again. Thanks again. Dan.

I have one of these fitted. PSI Power Power Pack Discovery TD5 - UNIT ONLY It was on the car when I bought it so cant comment on the improvement over standard. Fuel consumption is around 17mpg round town though and I dont drive it hard!!!!

Hi. As above really. Can anyone advise where this is located on my '97 RR DSE? My radio reception is ****e and thought i'd try replacing this (or check connections at least). Thanks Dan

I have the PSI box but it was already on when I bought the car so cant offer any advice to standard performance.

Check the power/earths on the BeCM unit under the drivers seat.

Check the power supply and earths to the BECM are all tight. I had numerous problems and found the main power supply cable was loose. Everything now works as it should.

TBH, mine was fitted when I bought the car so not sure. All multi plugs are different so you shouldnt be able to plug it in wrong. I think the vac pipe will go onto the inlet manifold.

Split the multi plug under the inlet manifold and insert in the box/wiring (thats how mines fitted).

Sorry to thread hijack. I have straight through pipes instead of back box's (twin). Anyone round Sheffield area want to swap em for back boxes?? I have a 97 2.5 DSE

I beleive these have one (scrap yard/breakers). K R Autos 522 London Rd, Sheffield, S2 4HQ Tel:0114-255 1173 I was going to try it in mine.

Check the power supplies to the main ECU under the drivers seat. Your fault was just one of the ones on my P38 which was cured by tightening the main power lead.

Take it to Ascar (nr meadowhell). They'll supply you with the correct diameter pipe.

Id guess around 2'' - 2 1/4''

Did you check the power/earth terminals? Cured all my problems.

Yup, thats South Yorkshire. Ah well, theres always next summer.:D