Search results

usually what has gone wrong is that the window regulator (scissor like mech) has dropped apart if this is the case look on e-bay for a new one DO NOT GO TO THE MAIN STEALER do however take careful note as to the vin number which their ad quotes as the mech and motor changed approx 1995 and will...

the lock doesn't seem overly stiff in operation but i've got some graphite grease so i'll take the door card off over the weekend and try giving it a squirt or two of that.. i need the card off to grease the window mech anyway as i replaced it last week and just now remembered that i never...

hi techy type query this one.. i have a '95 disco 300 tdi which has an annoying problem with the remote central locking in as much as the drivers door locks with the remote as do the other doors, however within a few seconds the door lock button jumps straight back up and if not locked with the...

the nut size was with the shiny cover on... this may sound bloody daft.. but the shiny bits are not meant to come off, however if you've loosened any of the daft caps from the nuts they'll rattle like buggery and annoy you to death...... mine had one with a loose cap and i nearly wore me finger...

hi just checking...... you do know that there are three right hand thread track rod ends and one which is left hand thread .......... that one was just fitted to puddle your mind you know

yes that's exactly the item i mean .... by the way why don't ****parts include the bloody o-ring in the box? are they deliberately being stupid and obstructive?

here we go again folks before i go into detail i will just point out that this is my first disco and i'm not exactly very active due to arthritis so tend to want to know what's what before threatening the bloody thing with the old spanners (it's bigger than me!!) i have what appears to be a...

no m8 they don't come off they just cause strange bloody rattles which always seem to come from somewhere strange steering/suspension type of area. i spent 4 months looking for mine then found it by accident while doing some other work! if you have still got the alloys on then get a few (folks...

well the photo shows where the air box was on a 300 see the holes where it was bolted down. if you ain't got a filter in the snorkel then some cheapskate has fitted the snorkel using a fitting kit which is for a different snorkel than that fitted, some have a filter inbuilt and some connect to...

sorry m8... no locking wheel nuts fitted

HA!!!! gottit bloody stupid shiny wheelnut was the culprit after all. whilst changing front springs and a track rod end thingy for the anual re-introduction to religion (mot test to the un-enlightened!) we came across a wheel nut with a dent in the shiny bit and replaced it as a matter of...

hi its the 's' model with the shiny wheel nut things i'll have a good fiddle with it in the morning as long as i dont get caught!!!! i'll let you know the results later could be possible as it does sound metallic like!

tell 'em to go to hell mate insure disco with nrg who know what they're doing (even give me a classic policy for my 95 300 tdi very reasonable rates i paid in cash then ran out of broker in case they changed their mind!!!

the air con system actually makes water so it won't actually have leaked from anywhere but will be coming from the system drain. this is perfectly normal for any air con equiped vehicle when the system has been used:- what air con does is to dry the air out and cool or heat it according to your...

it's ok my end caps have been pop riveted together! previous owner's dad was a proper artist of the end it or mend it persuasion

hi i have a 300 tdi 95 n reg with one of the most annoying front end rattles that i just do not seem able to find. the noise sounds like brake pads rattling but the pads aint loose and the noise persists even when i have my foot on the brake pedal. the calipers also are tight so it aint that...