Search results

This is from a 2011 Freelander AM/FM/CD/ Bluetooth £40 inc postage

The other day I reattached the heat shield above the rear exhaust box. It had come loose and started rattling a few days before. There are two fixing points under the axle that you can't reach. These photos show one side (with the pop rivet) and one of the rear fixings. I sprayed the...

Here https://www.landyzone.co.uk/forum/land-rover-freelander.9/

Does the rear left hand door lock and unlock ok on the remote? If yes, how much to remove the actuator mechanism and post it to Cardiff? P S. Here's the video showing how to remove it

If you tell us where you are then someone may be able to recommend a local LR specialist. Main dealers will fleece you.

Today I took the switch off, cleaned the plug and socket, bent the spring that operates the switch out a bit, checked it worked and then re-assembled it. I don't know how long it will last, you can't take the actual switch apart to clean the switch contacts. P.S. Yesterday the odometer clicked...

My stop/start didn't work for years. When starting was beginning to get difficult I replaced the battery and the stop/start has worked ever since driving solo. It sometimes works with the caravan hitched up and sometimes doesn't.

Got the Bonnet Open warning on my FL2 today, so after a bit of internet searching I pulled connector off the sensor and shorted the terminals in the plug with a bent pin. Now I need to decide whether to replace the sensor or to try cleaning it up to get it working again.

A few years ago my Disco failed it's MOT because of rust near a rear seat belt mounting point. I removed the seat belts and seats and got a pass with an advisory.

What car? Have you tried reading fault codes?

Someone seemed happy with PK Automotive in this thread Poor running

The MAF fault still there after fitting the new one?

Have you checked for fault codes?

Wales

Mine chimes if the key fob thing is in the ignition and the door is open. I don't have to be driving for it to happen.

Have a look at this video of one being stripped down . Doesn't directly answer your question but it's interesting

Can you post a photo? I know what a vacuum pump is and I know what a core plug is but I don't understand what you mean by

If you search on youtube you should find some videos, if you can't find one for the window regulator search for one for replacing the locking mechanism, you have to remove the window regulator to do that. You need the window all the way up, use gaffer tape to fix it to the door frame, then...

If you do some searching on Youtube there are some videos showing how to fit it. It's a bit fiddly but do able

It must be time for an update from the OP