Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. G

    Intermittent brake squeal AFTER changing discs and pads

    Ah, sorry all, I forgot to update this one. I sorted the problem!!! And the culprit was.... ...the pads! I changed them for a completely different brand from EuroCarParts, and the squeal went away. The moral of the story - well buying cheap saved the day (thanks EuroCarPars) so it...
  2. G

    steering - tries to throw me to the kerb

    EeEK - yes, yes you did, but you can't blame me for baulking at first :-) Having bought myself a nice shiny balljoint service kit the job turned out to be less than scary - nice and easy to press them out and back in.
  3. G

    Intermittent brake squeal AFTER changing discs and pads

    tetsu0san - nope, never have in the past bodge99 - thats why I changed the carrier - all slidey bits are brand new. only the caliper and piston is original. The thing that I can't get my head around is, if its a problem with something touching, being sticky etc, then surely they should...
  4. G

    Intermittent brake squeal AFTER changing discs and pads

    As ever, I'm looking for a bit of inspiration around this problem. A few weeks back, I changed the pads and discs on the front of the Freelander. All was good with the world (the fact it went from "are we going to stop?" to "stopped"). Then I got a call from SWMBO saying that there was a...
  5. G

    steering - tries to throw me to the kerb

    Quick update. After changing the tie bar and steering link (so that i'd have new track rod ends all round) there was an improvement, but it wasn't the biggie. Then I changed the steering damper - again improvement but not the biggie On saturday I managed to get enough time to do the...
  6. G

    4.6 misfire help wanted £££

    If its any help, i've just done the coil packs, on my 4.6 motronic - started with a misfire on 5, then 5 & 8. Lacking power and generally thinking petty can was the way forward. New coilpacks on, and it goes like stink!
  7. G

    Nanocom Evolution

    Well i'd like to post a big THANKS to you Colin. Got my Nanocom on thursday, got all the details I wanted of the faults, ordered parts, and fixed my mega misfire today. Chuffed doesnt get close :D:D:D Plus i've now got all the other faults to fix, but as i'd only had the P38 for a few weeks...
  8. G

    Nanocom Evolution

    I'm in for this offer :-) Ordered a Lynx this morning, but cancelled that now and sorting out the Nanocom instead - very unimpressed with a number of Lynx resellers now too!!
  9. G

    T4 Testbook

    oooh - just cancelled my order for a Lynx and getting this sorted
  10. G

    T4 Testbook

    Did you have any joy with this request? I'm in Chatham and getting to the point where I think i might have to bite the bullet and buy a diagnostic machine as i'm getting more frustrated with the P38 each minute
  11. G

    steering - tries to throw me to the kerb

    Thanks all - pretty much what I was expecting Tyres are same all round - Pirelli Scorpions, and the tread measures about the same all round. Its on standard RaRo/Disco rims, so that kind of rules out the issues with stupid sizes. Pressures are similar - after a week now reporting 28ns 29os...
  12. G

    steering - tries to throw me to the kerb

    So I bought a p38, and I'm gutted. I shouldve turned around two miles after leaving the sellers house. But I didn't. At any speed, its not that there is play in the steering because I can't feel any, but I clipped a piece of chewing gum in the road and had to quick to catch the change of...
  13. G

    Oil pressure light

    hahahahahah Mucho thanks Sierraferry - my spliced in bit of wire wire was fubar too!! when I tested it, there was a pip and then nothing (rather than the continuous bell of a good circuit). a bit of chopping and changing and I have oil pressure and a light that comes on with ignition, and goes...
  14. G

    Oil pressure light

    Thanks Sierraferry - more likely my misunderstanding :-) so contact to earth light on, switch open light off, so my pulling the cable wouldn't induce light on, it would induce light off. Not exactly a failsafe is it :-) Right, off to check the wires then
  15. G

    Oil pressure light

    @james - there might be two wires, but only the white one has a connector on the sensor end. @sierraferry - no flickering of the light - I was driving, it was on. Now changed sensor, light still on. Repaired wire, light off permanently. Hence the tried disconnecting sensor in the thought...
  16. G

    Oil pressure light

    Evening James - yep I know that now ;);););) Just trying to get to the bottom of why the light won't come on at all now - although I will admit to being slightly more hopeful that it isn't a buggered oil pump... I ran a new wire in from the point by the the inlet manfold right the way across...
  17. G

    Oil pressure light

    Thanks for that Sierrafery - so my second initial diagnosis (yeah I know) of a trapped wire (ie it going to earth) would be correct for the light being on permanently. But what of the current situation where the light won't come on at all - not even at ignition on - any ideas?
  18. G

    Oil pressure light

    So, i've successfully changed the clutch - on the test drive, got about 5 miles in, and the oil pressure light came on. borrocks. Pulled over, checked everything, had oil, nothing blindingly obvious, so got home. Started by changing the oil pressure sensor - no change. Then noticed i'd got...
  19. G

    R380's - what'll fit a TD5?

    Well I'll be - whipped (hur hur hur) the gearbox off this afternoon, and blow me, if there wasn't a shed load of shrapnel in the bell housing and the two parts of the clutch plate doing their own thing. So new clutch it shall be :-) Thanks James, saved me a load of hassle...
  20. G

    R380's - what'll fit a TD5?

    hmm, could be a cheaper fix than I thought then if the clutch has really let go like that... Going to be a bitch whatever I do next, some #### has had a go at the transfer box before and rounded off one bolt, and I cant get Mr Angle Grinder onto that one, so the whole lot has to come off in one...
Back
Top