Search results

dearest redhands , pva is an all purpose ahdesive made from guess wat latex rubber , hense sticks like **** to a blanket on guess wat ....rubber backed carpet and lino also rubber backed also pva when in contact with a smooth surface such a degreased ali makes a perfect bond which guess wat is...

have ya got a manual for it ? its quite difficult to explain gates but here goes in the wat i hope is a way ya can understand the gates are the slots were the gear shift for reverse has to be pushed through, its the resistance you feel when aimin for reverse , bit like shovin a bar between...

def change ya plugs if not been done in years . the puff of smoke is quite normal if ya engine is turnin over a few times befor kickin in to life . as ya engine is turnin over with out firing its still puttin fuel in then it fires and burns the excess fuel which causes the intial black cloud...

If Ya Can Make A Template Out Of Card And A Rough Drawing Of Wat Ya Need My Dad (now Retired And Seriously Annoys Me Loitering With Nothing To Do In My Garage Every Day ) Lives To Make Stuff Like This , The Mans A Genius (master Engineer) Plus Itll Give Me Some Peace While Hes Pre Occupied If...

Weve Seen This Numerous Times , 99 Times Out Of Hundred This Is Why Reverse Is Sitting In The Gate Not Behind It Thus The Gate Aint Shutting Causes ; Daft I Know But Check The Rubber Matting/gators Is Stopping The Full Travel Of The Gear Shift (it Really Is Common ) Try Reverse With No...

N Ot Done This On A Defender But Done 3 L2oo Warriors Same Way For Different Reasons Air Filter Set Up Is Same More Or Less Spin Said Filter To Have Intake Facin Forward , Remove Locating Stud Off Bottom But Mark Dead Top Ctr Wit Chalk Or Something Like (easier To Locate It Later ) Fasten Ya...

Not A Real Help With Out Seeing But To Find A Squeak In Noisey Engine , Take A Metal Bar And Put 1 End Of Possible Offending Engine Parts The Other End Needs To Go On Your Ear This Will Amplify The Sound Whilst Drowning Out The Ambiant Sound . You Will Really Be Able To Tell Collapesd Bearing...

Pull Ya Oil Filler Cap Off And If Its Full Of Snotlike Custard Its Ya Head Gasket . No Snot Is A Good Thing . Mine Has Started To Do Same Thing And It Aint The Head Gasket How Ever I Noticed On Oil Im My After Turbo Pipe , Id Check That 1st . If It Does Turn Out To Be Ya Head Gasket I Suggest...

For Ya Floor Id Say Get A Sheet Of Tread Plate (about 60 Quid For 8foot X4 Foot Sheet 2mm Thick , About A Quid A Cut From The Supplier , I Recommend A Company Called "aalco" Branches Are National . For The Wall And Roof I Used 0.6 Mm Aluminium Sheets (8x4 Or 6x3 Foot) It Is Really Easy To Mould...