Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. wammers

    What stat to get

    And also a lot gooderer. :D
  2. wammers

    What stat to get

    You haven't learned much in ten years on here have you. :D
  3. wammers

    What stat to get

    Guess you didn't read what I wrote OEM stat with seal £12.50 Island 4x4.
  4. wammers

    What stat to get

    OEM should be fine stat should come with seal.
  5. wammers

    P38 ABS removal? Just wondered if it's been done.

    I make a point of never encouraging people to do stupid things. But it's your car ruin it as you require.
  6. wammers

    P38 ABS removal? Just wondered if it's been done.

    Their are some people who ask really silly questions on here from time to time. If you want really basic get a series 1 or even a wartime Jeep that the series 1 was copied from.
  7. wammers

    Dial & Electrical mayhem whilst driving! Help

    Alternator problem.
  8. wammers

    What should 140-50psi feel like

    The EAS is pretty simple to sort out, might I suggest you get someone who knows what they are doing to look at it.
  9. wammers

    What should 140-50psi feel like

    The compressor should if in good order produce around 175psi at the outlet shortly after start up. If by placing a finger over the outlet flow can be stopped the compressor needs servicing. If the compressor is in good order air should be forced past the finger.
  10. wammers

    P38 power loss

    MAF is for exhaust gas inflow measurement for EGR it has nothing to do with how the engine runs.
  11. wammers

    P38A Front Wheel ABS Speed sensors

    Not good but not dead yet. Never delt with D so if that's what is fair enough. As far as I recall from memory resistance through sensor is around 9 ohms. Pretty simple thing to diagnose.
  12. wammers

    P38A Front Wheel ABS Speed sensors

    Nominal voltage to sensors is five volts. Main things to check are supple voltage presence, resisted continuity through sensor, and sensor to reluctor ring gapping. If feed voltage is present, there is a resistence circuit through sensor and sensor is gapped correctly a signal should be sent to...
  13. wammers

    Range Rover P38 DSE loss of power

    The correct size pipe also helps.
  14. wammers

    P38A Front Wheel ABS Speed sensors

    The voltage to the sensors is five. Check them for continuity and for voltage.
  15. wammers

    P38A Front Wheel ABS Speed sensors

    Was talking EAS sensors there silly me. Suppose you can swap around speed sensors just different wire lengths front to rear. You need five volts to the sensor this pulses as wheel rotates giving the signal to the ECU.
  16. wammers

    P38A Front Wheel ABS Speed sensors

    No. Early ones only go in the one position. Later ones can be swapped side to side but not front to rear.
  17. wammers

    P38A Nanocom Tips

    If BECM is unlocked, if you want to leave it unlocked you need to pull the diag in out plug at front of BECM to work on HECAV. White plug from memory.
  18. wammers

    P38A Nanocom Tips

    The Nanocom can have problems communicating with HEVAC if the BECM is unlocked. See the spec sheets.
  19. wammers

    P38A Nanocom Tips

    Is BECM unlocked ?
  20. wammers

    P38A Front Wheel ABS Speed sensors

    They won't register speed if the gaps are too large
Back
Top