Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    P38A Fuel problem "continued"

    Thanks, understand fully your point about not shoving in 12v though after 7 days it is very tempting. Have tried the fuel inertia cut off, which is down and I presume this means it is not on. Not sure where to unplug the engine ecu - Where abouts would you suggest checking the lives and earths...
  2. A

    P38A Fuel problem "continued"

    Ian, Many thanks what you say makes alot of sense. Yes I was mesuring off the round connector under the manifold and confirm there is only about 4v at pin 3 (with a fully charged battery). Clearly, not enough to open the solenoid. We also have the same voltage at the ECU SO It does now look...
  3. A

    P38A Fuel problem "continued"

    Yes tnofno, two pumps. One in the tank running away nicely but the injection pump will not work from the power from the ecu. We have taken off one or two of the injectors and no diesel coming out. Strange thing is that when we plugged her in to an external power supply (computer - but didnt have...
  4. A

    P38A Fuel problem "continued"

    Jonathan, thanks, just replaced glowplugs and power fine also.
  5. A

    P38A Fuel problem "continued"

    Hi Spudh, thanks for response. I'm in Ballyhaunis, Co Mayo. Excuse my ignorance but what is the Faultmate MSV? And is it likely to find others with it? thanks, Alan
  6. A

    P38a Fuel problem

    thanks Ian, pump is working fine so will double check if there is power going to the ECU...
  7. A

    P38A Fuel problem "continued"

    Hi again all, still no start on my 96 diesel. We have now exhausted all known fixes that we picked up on this site - intank fuel pump fine, relay ok, fuse 39 ok, replaced the leak off pipes. And checked other suggestions on yesterdays post. I guess the only thing left is the procedure to re...
  8. A

    P38a Fuel problem

    Thanks for the prompt response folks. I have tries the eka thing a few times and still no luck in knocking off the immobiliser - if in fact that is the problem. Thanks for the other suggestion re getting an independant to re sync becm and ecu. I live in the west of Ireland so not to easy to...
  9. A

    P38a Fuel problem

    Greetings all, I have a 96 p38 diesel and and what I think is a fuel problem. I have read all the fuel problem posts and found them very helpful but think my problem is a wee bit different. Here goes! Engine cranks but refuses to fireup. We have checked intank pump and even installed a second...
Back
Top