Search results

do not use heat find some one with proper tool!!!!!!!!!!!!!!!!!!!!

hi but it wont fit the wiring plug fouls the bracket on the chassis the only thing that i have come up with is that the plate just offsets the sensor for fitment but when you screw the sensor on the nuts then foul the bracket so i am putting on like this see how it goes!!!!!!!!!!!!!

for the back rear n/s sensor its not the cover its a plate for the sensor to sit on which way round i dont know

hi i have just bought a height sensor for my p38 and i have noticed it has a plate with it. It has two holes and two bolts on it anyone know what its for and how to fit which way round it goes

Get a life

I have recently replacd a height sensor after some trouble with the rear ride height on my rangie basically the n/s/r spring would inflate to highist every time i got in rangie how ever after being read by rovacom sensor was knackered changed been ok til couple of days ago same thing and this...

Hi does any one know where you can get them recon from having trouble with my system rangie done 95k this block been on since then any ideas thanks

ay one had any probs before

are some nuts tapered and some flat which ones and go for the ones upto 2005 but flat or tapered which ones thanks

Hi i have bought some rr alloys off a 2005 model what nuts would i need to fit my p38 on a 1996 thanks

I Noticed I Am Getting Water In My Spare Wheel Well Have Stripped A Lot Back And Cant See Were Its Coming From Any Ideas Any One

hi been progress found out receiver was knackered and the old key.the key i had was sending wrong signals into bcem and knocking new one out. when i took battery's out of old key and moved it away from car hey presto after re syncing new key with the old receiver it worked on and off. i then...

how do you sync remote lot of people got different ways

hi yeah alarm fault has gone off with the interior sensors being replaced but new key fob not working alarm or central locking have to keep on using eka code to start up tried another lock mechanism but no different suspect something wrong with receiver, wiring, or codes not matching bcem or...

hi since then it has stopped working all together and the alarm fault message is on dash i have changed a receiver did not make a difference bought a new key that has not made a difference had it code read before i did and did not bring anything up any faults i have to use the eka procedure...

HI i had a problem with my eas the famous warning message max speed 35mph was on how ever found out their was no 12v supply to eas ecu is this meant to be on 12v all time or on ignition switch

how do i know of this one

HI can any one tell me if i have a prob with my remote or some other thing some times the remote locks and some times it wont i have had new buttons batterys is their anything else i need to change?????? to mae them work all the time :confused:

hi found relay yeah he reseted the gems part of the alarm system thats all he did tryed starting it came up with engine disabled message put code in with key and it fired up no lights on know only light on is srs light and the one with a car with a arrow under it persume air suspension one and...

the only message on dash was coming up with engine disabled he pluged computer in reset alarm ecu system we put the code in again and it started looked under passenger seat can only see ecus