Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    No light - I think I'm in dim/dip land

    I did ! It was a header in the dash - details here:Help! no lights
  2. A

    Anyone selling old Range Rover diffs?for my series landy diff gearing upgrade ?

    Does that mean those diffs are still available? :)
  3. A

    No light - I think I'm in dim/dip land

    OK - it wasn't the dim dip relay - the new one arrived and made no difference. From the diagram attached above: 70 is the light switch 75 is the head light relay 76 the dim dip relay 6 is the fuse box With the circuit broken I'm still getting 12 V at the switch feed - ie pin 1 measuring from...
  4. A

    No light - I think I'm in dim/dip land

    I have a 2000 Defender and think I'm in dim dip land ..... I've no lights at all except for the flash, which is of course on a different circuit. Initially, my lights intermittently stopped working - and the multimeter was showing nothing at the brown wire that feeds the switch but the...
  5. A

    Any stolen Landrover in the Merseyside and surrounding area!!!

    ba ba ba ba baaaaa baaaaaa...ba ba ba ba baaaaaaaaaaaa....ba ba ba ba baaa baaaaaaa. ba ba ba ba baaaaaaaaaaaa. daaaa da da da da da da daaaa dauhhhhhhhh....daaaaa
  6. A

    How a TD5 starts.

    Here is an interesting thread on a similar topic with a few good answers in it Engine & fuel engineering - Smart CDI Cam Question
  7. A

    How a TD5 starts.

    The question remains then - how does the ECU know the cam position ?
  8. A

    How a TD5 starts.

    is the crank shaft sensor reading direct from the shaft - or from a rotation that is gear driven by the crank at 2:1 - so that it can differentiate the inlet and outlet strokes?
  9. A

    How a TD5 starts.

    I'll have a think about this...
  10. A

    A Frame renewal - brackets stuck

    How did you get on Joe? Hope you got it sorted!
  11. A

    Problem fitting egr blanking kit.

    Problem fixed on mine now. It was the bottom of the two allen bolts that fit into the exhaust manifold that turned out to have a head made of cheese… The allen bit just turned and rounded it out, so I tapped in a torx bit, and that just rounded it out that bit more. So I tapped in the...
  12. A

    Problem fitting egr blanking kit.

    I just rounded the hex on the lower bolt on mine ..... bugger
  13. A

    TD5 Injector question?

    The code is easy to find on the top of the injector - looks like this (picture taken from ebay): For mine the plot thickens - the part number recorded through Nanocom is NNN000120 - ie the later flashable ECU. So my guess is that mine has had a new ECU, the later type, and that's why...
  14. A

    TD5 Injector question?

    I've arranged to take my 2000 Td5 over to Bell Auto Services in mid June for a re-map. So prior to that I've been doing little outstanding jobs to get it ready, FPR leak etc. One of the things I've done is plug it into my friends Nanocom to check for faults. What its turned up is that Nanocom...
  15. A

    TD5 viscous fan coupling spanner size

    I took mine off today :D
Back
Top