Search results

Been having a start issue with my 06 L322 TD6 - started fine until recently, then one day refused to start - no warning lights/error messages, just no cranking or any other noises. Tried a few things, starting in P/N to check if gear shift lockout worked (shows correct gear on dash) took...

My 2006 L322 TD6 is having a sulk. A few days ago I started it from cold and was immediately rewarded with the 'HDC Fault' & 'Suspension Lowered' messages on the dash. I've owned the car for nearly six months and during that time apart from a knocking between 15-25mph from the prop bearing (UJ...

Hi folks, back into Green Oval ownership again with a 1999 Disco TD5. I bought it because of the reasonably solid chassis, but it does have the following faults that need rectification due to a short MoT: 3 Amigos on intermittently SRS lamp lit If I can I'll try to acquire a Nanocom or Hawkeye...

Alright folks, my recently acquired P38A (1999 Thor 4.6) has a nasty habit of blowing water pipes. The previous owner admitted replacing one of the pair of pipes at the top of the engine bay to the bulkhead. The trip home from purchase was uneventful for 75 miles and then it blew the 3-way hose...

So, after a couple of years of not having a roadworthy Land Rover, last week I collected a P38. Naturally, it needs fixing.... It can’t hold its coolant at the moment, so a new set of hoses will be ordered along with thermostats. The plan is just to tidy it and use it - maybe with the odd...

Hi folks, I'm on the lookout for a project. A big one. Anyone know to an absolute basket case Series in Devon or Cornwall? Ideally an 88, I'd consider a 109 though. Ideally needs: Rolling chassis, lower panels (not doors or hard top, have them already), wiring loom. Does not need: engine...

Due to an impending major change in circumstances the remains bits of my 90 have to go: Rear tub: in ok condition, needs work. seatbelt mounts corroded through - £20 Weller 16" silver 8-spokes with 265/70/16 road tyres. Fronts have 4-5mm tread, rears 2-3mm - £60 Windscreen inc frame - £40...

Sold

As part of my 90's rebuild I'm replacing several bits of bodywork, so the following is up for sale: 90 rear tub; Rear panels a bit rough where they bolt to crossmember, one corner has had filler and this has cracked. Seat belt anchorages corroded through, needs some ally plate grafting in...

I've got to move a 90 chassis from Tamar 4x4 near Liskeard to Perranporth - ideally this Saturday (1st November). Anyone able to help out? Beer/fuel tokens on offer in return :D Cheers

On my 90 when its first started from cold the steering is very stiff. After a mile or so of driving it frees up and works fine. It's not using any fluid, any ideas what's causing it? Cheers

Ok, I know its not the biggest/longest expedition here, but it could be my first. I know its been done in a Fiat 500 and an Ariel Atom, but I reckon a Landy would be better suited to snow-covered Norwegian roads. So, what do I need to know? What tyres would be best (BFG M/T's would be my...

Whilst fitting a new alternator to the 90 I dug up this ****-poor excuse of a wiring bundle: I'm having charging issues - old alternator gave up ghost, new one is only chucking 11.87v into the battery. I'm guessing the ####ed up wiring is causing issues, the main charge wire is nice heavy...

Anyone got a 300Tdi alternator spare in Cornwall? Went out to my 90 this morning and it wouldn't start. As the wipers, lights and heater have been getting weaker and weaker over the last week or so, I guess the alternator is shot. Tried a Land Rover breaker in St Awful but apparently they...

I'm finishing off the refitting of bits to the 90 this weekend, but I'm not sure what to do with the chequerplate. The paint on all the bits is starting to peel which'll look ****e with me noo paint job on the 90. I do use the chequerplate on the bonnet and wing tops to stand on so I'm after a...

I need to replace the CV joints on my 90, but apparently there are two types - 23-spline and 33-spline. Is there any way of finding out which ones mine should have without stripping out an old one? It's a 1990 90 that originally had a 2.5TD fitted, as far as I know the axles are the originals...

Are all 'fender seat boxes interchangeable? The battery box isn't in great condition on mine and I know to a Puma seat box fairly cheap an' lurcal. Cheers

As per title, pair of Qt diff guards, bought by previous owner for the 90, so should fit most Defender/90/110 etc (except Salisbury axles). Missing fitting brackets (Qt can supply replacements) and has some marks on the zinc coating hence price: £50. Collection only cos they're heavy...

Set of 5 Weller 15's with two BFG M/T's, two Falken A/T's and a shagged tyre on the fifth one! The four decent ones are all legal with a good few mil of tread, but I have a set of 16's on their way. Available from mid-next week, £100 takes them away!

Bought a set of NAS lights (4 indicator, 2 sidelight, 2 tail/brake light) for my 90 a few months ago but decided not to use them. Comes complete with 8 mounting rings, bulbs and a set of plug leads (6 2-pin, 2 3-pin). Cost me over £90 in total, so I'm looking for £75 posted. Cheers :)