Search results

Hi all I have tried and tried to get the wires the right way around on the rear left hight sensor but my 3 wires coming from the harness are black/yellow brown/yellow red/yellow does anyone know which pin they go in on the plug pls Thanks

Just a update i have taken apart again and now only the secondary shoe is moving any ideas ? I have attached a video if it works

I have tried that there is movement between the cables and the arm on the primary shoe

I have had them back apart today and the module is making a noise now like it's trying to pull the cables but it isn't so thi k it's the module itself mate as the parking break was working then wasn't then was then wasn't if you know what I mean

I have the Kingbolen s 800. I really wanted a picture off the wires going into the passenger side rear plug as I have a plug with wires in it but there a different colour from the loom

Anyone any ideas?

Yes I have a code reader and thank you much appreciated

Sorry a 2006 range rover sport hse 2.7 tdv6

Does anyone know which colour wires go into which pin in the plug into the rear passenger side height sensor. The person before me has replaced the plug bug the wires are different to the harness and it doesn't work Thanks Stephen

Thank you very much mate I have done this numerous times and it still won't engage the parking break just the flashing red park light on the dash. I have tried the latching/unlatchching with the obd reader and it just clicks think it mite be a problem with the epb module

Hi all I have a 2006 rrs 2.7 tdv6 and just replaced the rear discs and pads but not the shoes and now the warning lights are on the dash and parking break isn't working any ideas? Thanks Stephen

I have replaced that aswell when I had them apart as the old one had a rip in it

Is that the 0 ring on the master cylinder?

Yes I have ordered the right one this time. I will have to get it smoke tested as its not holding pressure. If you drive and stop it has pressure when you undo the vacuum like but if you reverse and on the break all the time there isn't any

I haven't a smoke machine to test I took the booster off and it had oil in it I emptied it out as I bought the wrong booster just put it back on. I have changed the vacuum pipes and valve on the vacuum pump. Now it changes gear much better for some reason but when the car is at idle and your...

I have replaced that and it still the same 😫 it changes gear better now. Do you think it could be the vacuum pump.itself ?

1 last question mate. How does the valve come out to replace it with the 1 in that LR018673 pack ?

Champion I will wait till they arrive and let you know. Again thanks

Sorry mate I'm ordering them Sorry mate just ordered that LR018673 now. Do you have to take the pump off to get the valve out ?

Sorry I have only just looked at that p017 I was going to get the new seals for inside the pump but just realised it's the valve.