Search results

I have all four p38 doors with everything still on them, the colour is a dark grey, £15 each or all four for £40. Otherwise, it's off the scrap heaven

Couple of months ago the battery was dead after leaving the p38 for a week, i left it on charge untill fully charged and it's been fine since, last weekend i drove a 340 mile trip and all was well. Yesterday, the battery is dead again?, the dash has been showing a alternator fault ever since i...

Whilst the p38 was in having the starter changed, i asked the guy to check to see where my oil leak was coming from, he's advised me it's coming from between the engine and gearbox :eek:. Can anyone tell me if this is a difficult job DIY or should it go into a garage? cheers

Engine was fitted by Spencer Engines in yorkshire back in the summer, i got no paper work with the car, had sent numerous emails and phone calls to the manager, who said he would forward the paper on. This has been going on since september 08 :mad: and im now p..... off with them, so im sharing...

I broke a 4.0 range rover months ago, im left with all ecu's from under the seats and 1 or 2 from the n/s passenger footwell, if anyone wants any then pm me an offer, otherwise im binning them:eek:

Can anyone help me with some ideas as to why my seats are not heating up, the lights come on but no heat, i have checked the fuses and their fine ?

Can anyone just confirm if im right, when i go to start my 4.6 p38 it just clicks on the turn of the key, if i wait 10 seconds after it works, the dash is showing a alternator fault :confused: but everything else is fine, so is it the starter then ?

Hi I have just brought some 20inch wheels off a newer range rover for my p38, the tyres are 275 40 20, can anyone tell me what sought of tyre pressure i should run at?.

can someone tell me where i can find the key remote receiver please !

just brought a suspension pump with all the relays, plugged it in and nothings happening?, would it need reprograming on a diagnostics machine ? any ideas welcombe

Tonight i drove my p38 for the first time at night, the car has sat since sunday and when i got in, the inside windscreen was wet with condensation, what's might be causing this ? Also whilst driving with the heaters on full and arriving at my destination, i happen to noticed water in the...

I have a spare TD5 intank fuel pump(WFX0000280) in good working order. £40 delivered in uk only

Im breaking my P38 4.0L as the engine was shot, if anyone need anything let me know. Im in taunton somerset but can help with delivery along M5 to bristol and M4 to Newbury on the 8th November. LPG kit anyone ? LPG gas conversion on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end...

I have a 4.6 hse, im needing a few parts but im amazed at what the prices some people are asking:eek: , like most, im always looking on ebay and cannot believe that people are asking £120 for a door, £80 for a bumper, etc etc. p38 are very common, so why are second hand parts so exspensive:confused:

I took my hse in to have a new centre box on the exhaust, the guy told me i needed new heat pads above the cats(there wasn't any), he said that the heat has started to melt the underseal and he had heard of this happening before, car ended on fire through the carpets. Anyone heard of this...

Hi guy's I used to have a disco 2 but hatted it with a passion and sold it, on saturday i picked up a 4.6 HSE, it's just had a new cross bolted engine fitted only 2 months ago, it's also fitted with a pinns LPG kit, this is only 14 months old too. I have driven it 500 miles allready and im...

My 99 td5 fuel pump is making a noise when i switch the ignition on and when im running, it's a bussing sound. Is this my fuel pump?, if so, how easy is it to replace?.

last night as i approached some lights, there was a slight clunk sound and i had no excellerator, left the car whilst i looked for a phone box, when i returned it started ok and the problem was gone, i procceded on a 25 mile journey with no problems. Today it happened again but this time after 4...

Has anyone put a anti roll bar onto their disco 1, after a chat with a guy in my local pub over the weekend, he said you can put a transit anti roll bar onto the rear of a disco. Anyone heard of this?

Last sunday the disco was working fine, then on monday she would not start, I checked the ignition coil lead and found it had corroeded, replaced it and still would not start, i have now replaced all leads, disi cap and the coil it self and still it wont start. There is a spark from all the...