Search results

Hello Guys, just to give an update... i got the project stopped for a few months.. and i know all situations can help other members in the future... I take the HP Fuel Pump out and send it to an specialist to test and refurbish.. surprise, the inside of the pump was severely damage. Put the...

AlteredTech, i got a regular Delphi replica from ebay + ELM27 with Torque. So i can see some live data. Nodge68, Low pressure sensor in this case its on the cap of the fuel filter. Standing still its around 100kpa and with ignition on its around 450kpa. The fuel pump on the tank and in the...

AlteredTech i will upgrade the brake lines before hitting the road. Safety first, always! And i got IPO to do(our Anual MOT here). I have checked the loom by check continuity with an multimeter from the plug of the rail sensor to the ECU. If there is signal passing with the multimeter, i think...

Nodge68, do you have some schematics from the pins from the plug of the camshaft sensor to the ECU? Just to check the loom

Dbest its from 01/2001. First's TD4's around (they come out 11 or 12 of 2000 here)... AlteredTech, yes, 10 years sitting on an garage without running. I got fuel reaching the HP pump, i have checked the entry tube and make another test, i disconnect the Pressure Valve on HP fuel pump and as...

I have tried that also, loosened one and then all pipes. No fuel its getting there. Fuel its getting to the pump, but it seems the pump its not pumping it up to the rail. Is there any sensor that could do that? Cancel the fuel pumping to the rail?

Hello Dbest43, I already spray it with Cleaning brake spray + eletrical contact spray + brushing and blowed all till dry. All the green gunk its gone. The wiring, as i said before, i have tested it, the pins back to the ECU of the car, all have continuity (checked with the multimeter). The...

Hello guys, happy to be here in this community Bought a LR Freelander Td4 a few weeks back, its been on a garage for the last 10 years! But i got an problem, i wont start at all! With the scanner i only got the following DTCs: - Maf - P1195 (HPFP valve) - P0190 (Rail Valve) I have replaced: -...

Hello all, Im Rúben, a newbie Land Rover Freelander mk1 TD4 Owner. (My first LR) Im from Portugal and i joined the forum because it have so many usefull information around, that i need to join the community Thank you all, cheers