Search results

Hello, I’ve got a issue with my transmission drum where it’s leaking, I’ve replaced the seal on the transfer box twice and put a new flange on, was fine for a week and now leaking again. When I replaced the flange I checked the bearing behind the seal and it didn’t seem like it had any play but...

Massive update! After me being stupid and looking at it the wrong view! Everything now works as it should, connector 588 had a few wires in the wrong place so noted facelift connectors has some wires in wrong place, massive thank you to those who helped me along the way and putting up with my...

Ahhh okay, I’ve compared them both and all my plugs to the fusebox including the ones that haven’t been rewired are opposite from the diagram the only thing I can think of is that the diagram is backwards

Hello, sorry for the long reply I’ve finally got some time to work on the landy, I’ve looked at the diagrams thank you for sending the link and looking at the actually car plugs and all of them aren’t what the plug diagram says it should be so say on plug 581 instead of mine being where they...

Okay I’ve got you, how have you got the connectors themselfs? All I’ve got is the wiring diagram as a whole, what would be your first diagnoses to check?

I know what you mean, I can read most of it but I’m a 50/5 with understanding what point of view I need to check the plugs at, for example correct me if I’m wrong as it’s a learning curve for me….CO588-2, 2 stands for the second wire on the plug?

The only thing is I won’t know where they are meant to go if in the wrong place at all unless I have another pre facelift plugs to match them up or does the diagram say what position each individual wire goes?

When I soldier and rewired the plugs I did one plug at a time and colour to colour so I have not miss wired it…. He says

Yeah I will have a look at the wiring, when the fusebox melted it also melted the plugs that go into it so I got some plugs from I believe is a facelift so do you think the wires in the plug I got from another car is in a different slot then it’s meant to in my car?

Sorry, so I put the 251 in the wipers work but my low beam don’t work, stereo only turns on when I put the lights on and other little bits don’t work I’m not sure from the top of my head but wipers work fine same with my poorly repaired 410 fusebox but I put the 250 in and literally everything...

Hi again, I’ve got another 250 fusebox again from Paul at discovery 2 parts on eBay and I’ve got the exact same issue with the wipers, Paul tested this new fusebox and it’s 100% working so I guess we can rule the fusebox out, any suggestions? The wipers work perfectly with 251 fusebox.

I’ve got you, okay I’ll do that then see what happens. Thanks!

Yes I’ve got both 410 repaired fusebox and 251, I will try that but if you don’t mind me asking what does SRS stand for? And what do you mean illumination circuits? If it is the 250 fusebox what’s the next best plan of action to do? Get the 110 fusebox? Or would I need a 100% working 410?

Hi again! Just a quick update I’ve been chasing wires all day regarding the indicators and I found the issue … ready? … the master switch, the indicator tab was broken and so it couldn’t switch indicators, one has been ordered, just need to find out what’s going on with the wipers, was working...

I’ve installed the new fusebox and all issues have gone away but the right indicator is still staying on flashing and I’ve got not left indicator and now the front wiper blades only work when switched off and turn on when switched on, washer jets don’t work at all… I’ve chased the indicator...

I’ve had a look at the ones that I could find and they seem fine, I’m not sure what else it could be.

I been looking at the electrical diagrams and I have got a feeling it’s header k109 and header k108 that has been burned out the same time the fusebox, does anyone know the location of these?

Hi guys, just to give you a updated about the issue, I’ve installed my yqe000250 fusebox and it hasn’t 100% worked, I waited 5 minutes to wait for the immobiliser light to go out but my right indicator is still staying on flashing without it switched on and my left indicator isn’t working at all...

Hi, okay thank you both so much! This is my last theory as the car was working fine before my old fusebox decided to crap itself hence the doubt, it’s been a few months with this issue so I really just want this sorted ones and for all! Big thanks again and I’ll get back to you guys to say if it...

Hi, I’ve been looking in to the link you sent me and it might be a problem using the older ones as my vin ends with 2A743682… Looks like the only compatible one I can use is the original 410, please correct me if I’m mistaken?