Search results

Hi , thanks for the reply. No there has never been any warning lights on . According to the nano com everything is working as it should with all valves opening and closing at appropriate times although I’m new to nano com I think I’m correct in how I’m using it.

Sorry folks this might be a long one so grab a beer or tea! I have a discovery2 from 2001 fitted with a td5 engine and 4hp-22 auto box. When purchased all was good for a few months when one of the pipes leading to the gearbox oil cooler came adrift leading to a catastrophic loss of fluid...

Hi, thanks for the replies. Yes, I have completed a stall test and all is within the normal range. Oil and filter changed a few times. Thanks

Hi, I know this is a long time ago now but did you ever get to the bottom of the issue? Mine is a 2001 ES auto with the same problem. Many thanks!

Thanks for confirming, appreciate that! May have to start looking for a TC soon. Will check the MAF and MAP first though.

Thanks DereklyD2, appreciate the advice. The only ones left to check are the Maf and Map sensors as have checked the rest. The hi/low sensor in the transmission reads the wrong way round according to the nanocom but I've been assured that's normal on a nanocom. Did have a code that I can't seem...

No, same torque converter, mechanic seemed to think it was ok.

UPDATE, Done the stall test. All within the normal range, 2600-2800rpm. No luck this far with a diagnostic tool but still working on it. Thanks!

Thank you Sierrafery!, I will look about a diagnostic tool and will do a stall test today, see how that goes. Thanks again!

Hi all, I hope you are all keeping well. I'm having an issue with my auto gearbox on my 2001 td5, has 219,000 miles on the clock. The gearbox was replaced a few months ago with a 2nd hand unit with 100,000 miles on it. All going well though the torque converter only locks sporadically and only...