Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. P

    Piston Ring Gap Positions - 1985 LR90 2.25 Petrol

    Afternoon all I have an early LR90 with a 2.25 petrol 5MB engine. It's RHD. I've had the engine out and stripped down to try and solve a couple of issues and I'm now putting it back together but I've read conflicting things regarding piston ring gap orientation? Can anyone help? Taking it that...
  2. P

    Crank Seal Leak - 2.25 Petrol 90

    Hi all I have a 1985 2.25 Petrol Land Rover 90 which seems to have developed a Rear Crank Main Seal leak. It was only quite minor to start with so I've been managing with it for a while. However, now it's leaving a small oil puddle even when parked up and I'm having to regularly top up the oil...
  3. P

    Permanent Live even with ignition off?

    Hi all I have an early 1985 LR90 with 2.25 Petrol Engine. The car was fine this morning driving to work but when I came out it had developed the following problem: Problem: With ignition off and key out the Battery Light and Oil Light remain on and the electronic petrol pump continually primes...
  4. P

    Ballast issue

    Hi all In a bit of a nutshell, I have a 1985 2.25 petrol 90. It's had a few running issues lately mainly relating to fueling and carb issues. I changed jets, etc. And it started running better, just a bit of bubbling at the exhaust which no end of tuning and adjustment would get rid of. So I...
  5. P

    Carburettor float vent solenoid issue

    Good evening I have a Land Rover 90 with a 2.25 petrol engine fitted with a Weber 32/34 Dmtl Carb. I recently stripped the carb down to fit a new accelerator pump, needle valve and other bits and to give it a clean. I'd done the head gasket prior to that. Long story short, since putting the...
  6. P

    Freelander 1 1.8 won't start - P0340 Code

    Hi all. I'm after some help. I have a 51 plate Freelander 1.8 Petrol K-Series which won't start. The problem started a while ago when I noticed after several motorway drives that the engine idle seemed lumpy with excessive vibration. I initially thought worn engine mounts so changed them and...
Back
Top