Search results

OK, I drove her down the street tonight and its running good :) I need to lube the drivetrain does anyone have a good thread on the maintenance?

Well I got it started :) but the oil cooler line was cut on the engine I put in so all the oil poured out on the floor :( but it didn't sound bad :) and I have another line I can put on. It just sucks that 3 quarts of oil just poured out on my garage floor.

Well its in and I'm ready to start it but the battery is low and I need to figure out where two of the ground wires go. One comes off the starter and one comes from the back of the head on the drivers side.

the plugs out of both motors where about .042 and the part stores (I called two) said .032 so I set them a loose .032 (about .032-.035). I will be pulling these after a few miles to see how they are burning so if it seems to be an issue i will re-gap them. well its ready to go in. it looks a...

ready to go in. looks better than it did,

yes it does. thanks I got the distributor swapped over and SP's in @ 0.032 gap putting on wires now then its ready to go in. :)

Its a used engine. The wife ran the old one out of oil so I bought this lump. The breather is the stove pipe thing on the valve cover right? It is very dirty. I am swapping the distributor over. Is there a way to tell if I'm on the compression stroke with out the valve cover being off...

well it supposively has a guarantee so I would get another engine if this one is bad so I guess I am going to drop it in and hope for the best. question: I am swapping the distributor over. Is there a way to tell if I'm on the compression stroke with out the valve cover being off and I am...

One side of the motor has got hot possibly? yeah I was thinking that but I couldn't figure out why. Do the heads look the same from the outside? yes I don't think its had a head change not sure though. i.e. have they the same level of oxidisation to the alloy? they look like...

so...you think head gasket? am I wasting my time with this engine? It actually doesn't look much worse than the engine that came out of the disco.

sadly yes, new to me anyway :o I bought it used from a guy (against my better judgement) that said it had 80k miles on it.

Are you talking head gasket or valve cover? I just took the oil pan off and it didn't look too bad (compared to the heads)

Damn this is crazy. what does it mean when one side of the engine looks MUCH MORE DIRTY AND NASTY than the other side? please tell me what would cause this! this is the cleaner side\/ and this is the dirty nasty side. \/ valve covers side by side. What would cause the two heads to...

Please! does anyone know why it would look so different on one side than the other. Should I pull the oil pan while I have the engine out?

Damn this is crazy. what does it mean when one side of the engine looks MUCH MORE DIRTY AND NASTY than the other side? please tell me what would cause this! this is the cleaner side\/ and this is the dirty nasty side. \/ valve covers side by side. What would cause the two heads to...

bump back at it :) I got the other engine cleaned and preped to go in now I'm ready to swap them out. I guess this is pretty boring to a lot here but I really apreciate boomer for all the info. Thanks :D

well I just busted my lip wide open trying to get those ****ing TC bolts out:mad: :( wow I'm ****ed. that's all I had left before pulling the ****ing thing out. Such an odd bunch of size and different type bolts in this damn thing. So much room under the hood and they still made it a bitch to...

Would you guys worry about this being a leaking head gasket or would you think its just oil that has leaked down from the valve covers? . . . . When I said this sucker was dirty I was for real. The rocker arms feel good and tight though (no play). . . . . . . EDIT: BTW...

Thank you very much! This is all good information. I am about ready to pull the old one :) It seems I am taking a while to do this but I just don't have a whole lot of time to work on it + I am fussy also about the work I do so I like to do it right the first time. I'm going to pull the pan and...