Search results

I have no idea my nanocom had some other codes there also which was confusing. I took cover off and re did all good now. I’m not that experienced with it so I probably did something weird

In the settings I scrolled through and saved complete accident. There is an injectors and throttle menu. I must have written to ECU thinking I was saving other setting I changed. when I checked back today they were all 5 blank

Apologies for digging up. I found the problem I had in facet deleted the injector codes. Today took head off and re entered them all and good again.

I recently used my NanoCom to turn on the heated windscreen. Since adding this I have have had really smoky TD5 Disco 2. I think while tinkering I may have inadvertently change another setting or settings accidentally. Any advice as to what settings to check would be appreciated. It has EGR...

Removed front O/S footwell carpet today need to have hole in bulkhead behind pedals welded to give it more strength. Carpets are in the house drying out not sure how long that will take. MJS Headliners re-covered my liner. Great service, highly recommend. Thinking about a ReMap any views on...

For the Dash I used a combination of 501 LEDs and some smaller T4.7 However the one on the Dash that illuminates the mileage is completely different. I purchased a small replacement bulb for it but cannot get the old one out. Are they supposed to come out or only replaced as one unit?

Just want to check with you, I got the new Front Heated switch working and when I press the demist button on the Aircon now both the rear heated and front heated switch LED's flash together is that correct?

Fixed loose or poor contact

No, I’ll need to check fuses and nano com again tomorrow. Too dark now The switch isn’t illuminating with the lights on either.

I did all that, it was dodgy LED's, all good now, nice and blue :-)

Will check again tomorrow, switch was not lighting up, did not illuminate with lights on like the others and did not have the red led lit when enabled with Nano com.

Tidying up my Discovery 2. Drying out, replacing headliner, fixing sunroof seals and leaks, replacing roof bar seals and adding some blue LEDs to the dash and Temperature Console. Also filling holes that a previous owner used white silicon and sheet metal to seal. Painting Rust Converter onto...

I am having the windscreen fitted next week, today I installed the switch to the top right above the heated rear switch, added relay to 8 and both 40amp fuses. I've enabled the BCU with NanoCom and saved. Would I expect the switch to iluminate without a screen connected or do I need to wait...

I've got my temperature console out, replaced all 6 bulbs but still only the LED centre display lights up. Any idea how to fault find on this to get bottom and up/down switches lit?

JB Weld!

This post just about sums up the D2, I keep asking myself why do I keep it, found this after driving through flood, it had been fine previously. Who sticks metal to metal with Silicon and expects to stay? Carpets soaked and no easy way to dry until summer.

I'm about to put a heated windscreen in my Discovery 2, I've got the switch and Relay. Where does the relay need to go?