Search results

So after being moving away from a p38 for a while I decided I needed something with a green oval again , so I decided to buy a classic that's more of a project than I first thought I need a indicator stalk but seems to be an odd ball one with a different plug that I can't find in stock anywhere...

Been having a look at front props as mine is now goosed, does anyone know what the difference is between FTC4140 and TVB000130 apart from the price as the TVB number says diesel auto only , mine is a auto but has a manual rear prop on as it kept chewing the rubber joint up, just seems odd that...

Any gurus know much about the door Amps in the P38 I have a dead one due to a rather long wade that filled the doors with water :eek: and have 2 others in my spares pile but they have different numbers are they superseded or are they different ?

So after this happening tho other day and taking the radiator out with it I want to convert the fan to an electric one , it doesn't have the Aircon fans anymore as the entire system has been removed , wiring/plugs are still there for the fans , I know they used to run as a secondary engine fan...

I have been routing around the interwebs trying to find a steering box seal for the output of the box but all I can find is one to suit up to a 97 model vin , mine is a late model, did the later ones have a different variation of steering box or where they the same alll the way through ? As I...

Does anyone know if there is a difference between the early and late electronic lift sensor apart from the colour of the plug and the price of it? Reason being I bought a brand new one for the early type and I'm debating getting rid of my earlier P38 but if it's a case of just changing the plug...

Is it possible to put a non egr engine in the later 99 onwards P38 without much hassle or is it a case that loom and ecu are all different ? There seems to be a lot more early engines for sale than later ones, and egr's are a pain and normally get blanked off anyway ;)

I went to look at another P38 and ended up buying it (had to put it on a recovery truck to get it home) :eek: it's a 98 DSE with a manual box in it says select neutral if you try to change range which is I'm certain I've already sussed that fault as the remote is like a pudding stirrer (stays in...

does anyone here know of any dodgey connection areas for the abs system as i seem to be getting a lot of abs issues with the front sensors mainly, normally (short to another faults) both sensors are new also brings up sensor electrical failure faults from time to time too all sensors are fully...

I know most of you guys like your original p38's and I know I will probably get slated for bringing this up but is there anybody here that has done much to there's to take it away from standard and made there's more of a off-road toy ?

My P38 keeps eating the rubber prop joint, has chewed through 4 in a year, I have checked the viscous coupling and it works , the truck is lifted and can only assume that it's eating them as it runs on an angle , has anyone converted one to run a normal prophaft or know what bits are needed to...

After all my hard work last week for the mot the lemon has graced me with new faults , abs and traction fault plugged it in today quickly and fault states rh front abs sensor short to another done a quick search and a lot of people have said abs ECU, is there any common places for wiring to rub...

After putting off all the jobs that needed doing for the mot like any normal mechanic does, I finally pulled my finger out and spent a few very late nights after my normal 12 hour shift and finally got it all done, my list included, front wheel bearings , axle steering joints both sides , axle...

Does anyone know if any extended brake hose kits are available for the late p38's I ordered one kit that was for all models but they only fit up to 1996 and the rears are done in two halfs per side and mine is a longer single Flexi each side ?

I have faults codes 1 and 5 I know one is the injector sensor but the other one is has a description of fuel amount mechanism is that the advance solenoid in the pump? And would it be caused by the fact that the injector sensor has given up? Unfortunately I don't have access to nanocom and have...

Has anyone on here had success with replacing the buttons in their keyfobs, mine the lock button works and lights the led up but the unlock one doesn't, I only have the one key and don't want to unsolder them and than use fleabay ones if they are a load of junk and end up with a massive main...

Hi is there any admins available when I have created my account I have somehow managed to make myself younger than I am ‍♂️ says that I can't change it and need to contact an administrator, thanks

Hi first post here hope someone on here can help me with a running issue I have on my 01 2.5 p38, it runs then randomly just tries to stop as if someone is turning the key on and off then it will just die The fault codes that come up on my snap on scanner is as follows 1 adjust amount...