Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Jon308

    Slomofo 300tdi 90

    Thought that sounded ambitious for any landrover, at least it looks like fairly easy places to repair. Jon
  2. Jon308

    6x6 Range rover/double cab defender build

    Not sure if it should go in a build thread but there is a few bits i still need to get hold of if anyone has anything for sensible money, after a 2 door 110 rear tub, pickup cab back (think they are the same between series and defender so either will do and don't need the roof, a fold down...
  3. Jon308

    6x6 Range rover/double cab defender build

    Hi Finally got round to posting a build thread for my latest project. It starts with a eBay impulse purchase of a 1975 6x6 Range rover classic ice cream truck. The conversion was done in the 80's and was originally a Carmichael commando fire tender, unusually for one of these it has a drive...
  4. Jon308

    6x6 range rover info request

    Iva is not a problem as was expecting it anyway as I would run out of points doing body engine and suspension. May aswell get it out the way from the start and will keep me honest while building can't cut any corners. You are right the main difficulty with the double cab pickup will be sorting...
  5. Jon308

    6x6 range rover info request

    Will be doing the work myself, baring getting the chassis blasted/treated and painting the body. I will probably start a build thread on it this evening. Easy option would be to stick an extended rrc or disco body on it but i think the proportions never look right. from what i have seen the best...
  6. Jon308

    6x6 range rover info request

    Thanks for your help, been through the cab and there was nothing of interest in there, I do have a factory record for the chassis number but its pretty light on detail other than giving an additional line number but not sure what this means,I have attached a pic anyway Jon
  7. Jon308

    6x6 range rover info request

    Seems it most likely is a charmichle commando chassis then would make sense as it has a pto, just not sure about the drive through center axle. Could well have been added after service. once it's cleaned up and stripped will see if I can find any kind of part numbers on it. Hopefully it's mostly...
  8. Jon308

    6x6 range rover info request

    That is this one, he reckon it was based on a charmichle airfield fire tender but I can't find any other reference to a 6x6 variant only the tacr2 6x4 and commando 6x4. And that chassis number plate from landrover themselves made me wonder if land rover built it them selves originally. Jon
  9. Jon308

    D1 35s

    Around 75 with a 200tdi and defender transfer box. Might have gone a touch more but was to scared at that point, things get a little wobbly :)
  10. Jon308

    D1 35s

    2" will not be enough, had a set of 35x12.5 on my old bobtail d1, that had l around 3" on the suspension and a 2" body lift arches where also cut as far as I could to stop rubbing at full articulation. Main problem was poping half shafts and cv's when giving it stick off road though, so need to...
  11. Jon308

    Hello From Norfolk

    Thanks guys Wouldn't want to break the rules already ;)
  12. Jon308

    Hello From Norfolk

    Not sure I would go that far into softroaders, although have had a td4 hippo in the past. Was never even intending to keep the sport but came up very cheap started using it for towing and laning and was really impressed with it, could go places even on road tyres that the td5 d2 on at's I had...
  13. Jon308

    6x6 range rover info request

    to be fair to it at the time it was put in probably wasn't a bad engine for it, absolute buckets of torque simple and robust. Pretty much idled up the ramp onto the trailer. But they only rev to i think 2k and are massively heavy. Jon
  14. Jon308

    6x6 range rover info request

    Did have a quick look on the bay but couldn't find a good equivalent, see plenty of complete vans going for good money but no manky old things like this. so i just stuck it on for a quid to get it gone before it became a nuisance. live and learn i suppose.'shoved on' is right though, really...
  15. Jon308

    6x6 range rover info request

    sorry one of the few bits i am keeping, soon to be a lovely little 3bhp 4 ton perkins 4.236 with milner conversion on there though if that tickles your fancy? since you have had a couple of ice cream vans maybe you could shed some light into what people are seeing there that's worth buying? had...
  16. Jon308

    6x6 range rover info request

    Kevstar - yep, didn't think it would actually be worth anything and thought i would be stuck with it. the bits i am interested in are all below that fiberglass horror show :)
  17. Jon308

    6x6 range rover info request

    Hi, A recent ebay impulse purchase has left me with a 6x6 range rover ice cream truck. And I am after a bit more information about it since i can't find a whole lot on Google. What I know so far is it was made in 1975, converted to an ice cream truck in the 80's and lived its life on a Welsh...
  18. Jon308

    Hello From Norfolk

    Hi all, I'am Jon from Norfolk, had an account on here years ago but long since lost the info for it so have started a new one and thought i had better introduce myself a again. I have had/worked on and built land rovers for years and currently there are 4 on my drive, 2006 tdv6 Range Rover...
Back
Top